| Property | Value |
|---|---|
| Item | Smart UPS |
| UPS Type | Line Interactive |
| Power Rating | 1000VA |
| Mounting | Rack |
| Wattage | 800 W |
| Input Voltage | 120V AC |
| Output Voltage | 110/115/120V |
| Backup Time (Half/Full Load) | 14 min/4 min |
| Number of Outlets | 6 |
| Height | 1.7 in |
| Input Current | 9A |
| NEMA Plug Configuration | 5-15P |
| NEMA Receptacle Configuration | (6) 5-15R |
| Transfer Time | 5 milliseconds AC to DC; 1 millisecond DC to AC |
| Depth | 16.8 in |
| Cord Length | 10 ft |
| Width | 16.8 in |
| Battery Type | Valve Regulated Lead Acid (VRLA) |
| Housing Material | Steel |
| Voltage Regulation Description | Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147 |
| Operating Temperature Range | +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius |
| Audible Noise | 45 dBA maximum, front side 1m |
| High Availability UPS Features | Hot swappable batteries |
| UPS Dataline Suppression | 1 line TEL/DSL or Ethernet |
| PowerAlert Software | For local monitoring via the UPS™s built-in USB or DB9 ports, download PowerAlert Local software at http://www.tripplite.com/poweralert |
| Primary UPS Depth (mm) | 425 |
| Battery Recharge Rate (Included Batteries) | Less than 4.5 hours from 10% to 90% |
| Primary UPS Height (mm) | 44 |
| AC Mode Efficiency Rating (100% Load) | 0.99 |
| UPS AC Suppression Joule Rating | 450 |
| Nominal Input Voltage(s) Supported | 120V AC |
| WatchDog Compatibility | Supports Watchdog application, OS and hard-reboot restart options for remote applications |
| Communications Cable | USB and DB9 cabling included |
| Switches | 2 Switches control off/on power status and alarm-cancel/self-test operation |
| UPS Certification Details | UL 1778: 2014 R8.15 (5TH EDITION); CAN/CSA-C22.2 NO. 107.3-14 |
| Internal UPS Replacement Battery Cartridge | RBC69-1U |
| DC System Voltage (VDC) | 24 |
| Load Management Receptacles | Two switchable single-outlet 5-15R load banks |
| Output AC Waveform (Battery Mode) | Pure Sine wave |
| Installation Form Factors Supported with Optional Accessories | 4 post rackmount full-depth ( 4POSTRAILKIT1U ); 4 post rackmount short-depth ( 4POSTRAILKITWM ) |
| LED Indicators | 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status |
| Input Phase | Single-Phase |
| AC Mode BTU / Hr. (Full Load) | 39 |
| Rack Height | 1U |
| Overvoltage Correction | Input voltages between 128 and 147 are reduced by 12% |
| Network Management Cards | SNMPWEBCARD ; TLNETCARD ; WEBCARDLX |
| Power Factor | 0.8 |
| Included Mounting Accessory Description | Included mounting brackets provide front-rail installation in 2 or 4 post racks; For additional stability in 4 post racks, consider optional 4 post mounting accessories 4POSTRAILKIT1U u0026 4POSTRAILKITWM |
| Nominal Output Voltage(s) Supported | 110V; 115V; 120V |
| High Voltage Transfer to Battery Power (Setpoint) | 147 |
| Half Load Runtime (min.) | 14 min. (400w) |
| Communications Interface | USB; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface |
| Output kVA Capacity (kVA) | 1 |
| AC Suppression Response Time | Instantaneous |
| Alarm Cancel Operation | Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status |
| Storage Temperature Range | +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius |
| Battery Access | Front panel battery access door |
| Grounding Lug | Back panel grounding lug |
| UPS Power Module Dimensions (hwd, in.) | 1.75 x 17.5 x 16.75 |
| Low Voltage Transfer to Battery Power (Setpoint) | 83 |
| Output Watt Capacity (Watts) | 800 |
| Rated input current (Maximum Load) | 9.0A |
| Relative Humidity | 0 to 95%, non-condensing |
| Input Circuit Breakers | 15A |
| EMI / RFI AC Noise Suppression | Yes |
| Installation Form Factors Supported with Included Accessories | 4 post 19 inch rackmount; 2 post 19 inch rackmount |
| Expandable Runtime | No |
| Audible Alarm | Audible alarm indicates power-failure, overload and low-battery conditions |
| Cooling Method | Fan |
| UPS Certifications | Meets FCC Part 15 Category A (EMI); TAA Compliant; Tested to CSA (Canada); Tested to NOM (Mexico); Tested to UL1778 (USA) |
| Recommended Electrical Service | 15A 120V |
| Minimum Required Rack Depth (inches) | 19.75 |
| UPS Input Cord Length (ft.) | 10 |
| Network Monitoring Port Description | Supports detailed monitoring of UPS and site power conditions |
| Output Voltage Regulation (Battery Mode) | +/- 5% |
| Cold Start (Startup in Battery Mode During a Power Failure) | Cold-start operation supported |
| Output Volt Amp Capacity (VA) | 1000 |
| Output Voltage Regulation (Line Mode) | -21%, +8% |
| Frequency Compatibility | 60 Hz |
| Primary Form Factor | Rackmount |
| Individually Controllable Load Banks | Yes |
| Full Load Runtime (min.) | 4 min. (800w) |
| Undervoltage Correction | Input voltages between 83 and 107 are boosted by 14% |
| Battery Replacement Description | Hot-swappable, user replaceable batteries |
| Package Contents | SmartPro SM1000RM1UTAA 1000VA Tower/Rack Mountable UPS, Mounting hardware, Cabling for USB u0026 DB9 Monitoring and EPO Switching, Instruction Manual |
| USB | Yes |
| Waveform Type | Sine Wave |
| Surge Energy Rating | 450 J |
| Alarm | Low Battery, Overload, Power Failure |
| Battery Management | User replaceable |
| Form Factor | Rack/Tower |
| Backup/Run Time (Half Load) | 14 Minute |
| Software Included | PowerAlert Monitoring |
| TAA Compliant | Yes |
| Load Capacity | 1000 VA/800 W |
| Hot Swappable | Yes |
| Status Indicators | Line power status, Battery power status, Overload status, Voltage regulation status, Battery low/replace status |
| Emergency Power OFF | Yes |
| Protection Type | Over Voltage, Black Out, Under Voltage, Surge, EMI / RFI, Brownout |
| Serial Port | Yes |
| Maximum Operating Temperature | 104°F (40°C) |
| Certifications u0026 Standards | TAA Compliant, UL1778 (USA), CSA (Canada), NOM (Mexico), Meets FCC Part 15 Category A (EMI) |
| Output Capacity (VA) | 1000 |
| Product Compliance | FCC Part 15 Class A (USA); Trade Agreements Act (TAA) |
| Output Capacity (Watts) | 800 |
| UPS Applications | Large Network; High-End Desktop/Small Network |
| Package Includes | SM1000RM1UTAA SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS;USB cable;DB9 cable;EPO cable;Mounting hardware;Owner's manual |
| Grounding Details | Back panel grounding lug |
| Product Certifications | CSA (Canada); NOM (Mexico); UL 1778 |
| Country of Origin (subject to change) | Taiwan, Province of China |
| Package Quantity | 1 |
Smart UPS, 1000VA, 6 Outlets, Rack, Out: 110/115/120V , In:120V AC, Tripp Lite, Mfr#: SM1000RM1UTAA
$992,99
Free shipping will be applied on orders over $50
UPS,SmartPro,Sine Wave,1kVA,800W,USB,1U
9999 in stock
Must order in multiples of 1
Subtotal:
$992.99
You must be logged in to post a review.
Reviews
There are no reviews yet.