| Property | Value |
|---|---|
| HP | 2 hp |
| Voltage | 208-230/460 |
| Wetted Materials | Bronze, Carbon, Cast Iron,Buna-N, Ceramic and 316 Stainless Steel |
| Seal Material | 316 Stainless Steel (Spring), Buna-N/Carbon/Ceramic (Face) |
| Max. Pressure | 100 psi |
| GPM @ 40 PSI | 19.4 |
| Frame | 56J |
| GPM @ 20 PSI | 21.5 |
| Motor Type | 3-Phase |
| Hz | 60 |
| Motor RPM | 3,450 RPM |
| Impeller Material | Bronze |
| Housing Material | Cast Iron with nickel plating |
| GPM @ 90 PSI | 7.4 |
| Outlet | 1 in |
| Max. Specific Gravity | 1 |
| GPM @ 10 PSI | 22.5 |
| GPM @ 50 PSI | 18.3 |
| Height | 7 1/8 in |
| Item | Turbine Pump |
| Agency Compliance | Motor is UL Recognized |
| Motor Enclosure | Totally Enclosed Fan Cooled (TEFC) |
| Inlet | 1-1/4 in |
| GPM @ 30 PSI | 20.5 |
| GPM @ 60 PSI | 17.2 |
| Phase | Three |
| Width | 8 7/8 in |
| GPM @ 80 PSI | 14.9 |
| Best Efficiency GPM @ Head | 15.5 @ 75 ft |
| Impeller Type | Open |
| Amps | 5.0/2.5 |
| Bearing Type | Ball |
| Inlet Pressure | 138 psi |
| GPM @ 75 PSI | 15.5 |
| Duty | Continuous |
| Includes | OIPM |
| Max. Case Pressure | 200 psi |
| Inlet (In.) | 1-1/4 |
| Overall Height | 7.13 in |
| Standards | UL Listed |
| Features | Designed to Handle Liquids with Entrained Air |
| Overall Width | 8.88 in |
| Flow Rate @ 80 psi | 14.9 gpm |
| Flow Rate @ 140 psi | Not Applicable |
| Flow Rate @ 100 psi | 0 gpm |
| Specific Gravity (Maximum) | 1 |
| Motor Frame Designation | 56J |
| Pump Housing Material | Cast Iron |
| Duty Cycle | Continuous |
| Flow Rate @ 70 psi | Not Applicable |
| Best Efficiency Head | 75 ft |
| Wetted Material | 316 Stainless Steel, Bronze, Buna-N, Carbon, Cast Iron, Ceramic |
| Motor Enclosure Type | TEFC |
| Flow Rate @ 260 psi | Not Applicable |
| Priming | Self-Priming |
| Impeller Design | Open |
| Flow Rate @ 220 psi | Not Applicable |
| NPSHr | 138 psi |
| Flow Rate @ 180 psi | Not Applicable |
| Nameplate Voltage | 208-230/460V AC |
| Flow Rate @ 20 psi | 21.5 gpm |
| Flow Rate @ 120 psi | Not Applicable |
| Case Pressure (Maximum) | 200 psi |
| Discharge Type | NPT |
| Intake Type | NPT |
| Operation | Manual |
| Maximum RPM | 3,450 RPM |
| Flow Rate @ 40 psi | 19.4 gpm |
| Horsepower | 2 hp |
| Flow Rate @ 15 psi | Not Applicable |
| Flow Rate @ 160 psi | Not Applicable |
| Intake and Discharge Size | 1 1/4 in , 1 in |
| Flow Rate @ 30 psi | 20.5 gpm |
| Compatible Discharge Pipe Size | 1 in |
| Maximum Flow Rate | 22.5 gpm |
| Flow Rate @ 240 psi | Not Applicable |
| Seal Type | Mechanical Seal |
| Flow Rate @ 200 psi | Not Applicable |
| Shut Off Pressure (Maximum) | 100 psi |
| Frequency | 60 Hz |
| Minimum Media Temperature | -20 Degrees F |
| Flow Rate @ 50 psi | 18.3 gpm |
| Flow Rate @ 60 psi | 17.2 gpm |
| Flow Rate @ 90 psi | 7.4 gpm |
| Flow Rate @ 10 psi | 22.5 gpm |
| Compatible Intake Pipe Size | 1 1/4 in |
| Minimum Flow Rate | 7.4 gpm |
| Country of Origin (subject to change) | India |
| Package Quantity | 1 |
Turbine Pump, 2 HP, 3 Ph, 5.8/2.9 Amp, Dayton, Mfr#: 4JPG2
$936,62
Free shipping will be applied on orders over $50
Turbine Pump, Phase Three, Pump Housing Material Cast Iron, Motor Enclosure Totally Enclosed Fan Cooled, Horsepower 2 hp, Nameplate Voltage 208-230/460V AC, Shut Off Pressure (Maximum) 100 psi, Maximum Flow Rate 22.5 gpm, Flow Rate @ 10 psi 22.5 gpm, Flow Rate @ 20 psi 21.5 gpm, Flow Rate @ 30 psi 20.5 gpm, Compatible Intake Pipe Size 1 1/4 in, Compatible Discharge Pipe Size 1 in, Discharge Type NPT, Motor Type 3-Phase, Best Efficiency Head 75 ft, Case Pressure (Maximum) 200 psi
9999 in stock
Must order in multiples of 1
Subtotal:
$936.62
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.