| Property | Value |
|---|---|
| Height | 0.9 in |
| Depth | 5.7 in |
| Width | 6.9 in |
| Number of LC Ports | 1 |
| Management Port | Yes |
| Weight (Approximate) | 1.59 lb |
| Network (RJ-45) | Yes |
| Environmentally Friendly | Yes |
| Number of Network (RJ-45) Ports | 1 |
| LC Port Type | Duplex |
| Product Type | Transceiver/Media Converter |
| Product Name | SMI-1000-M2LC05 Gigabit Ethernet Media Converter |
| Form Factor | External |
| Maximum Distance Supported | 1804.46 ft |
| Total Number of Ports | 2 |
| Network Technology | 1000Base-T, 1000Base-SX |
| Storage Humidity | 5% to 95% non-condensing |
| Duplex | Full (Default-Up)- The media converter will advertise Full Duplex Capable, Half Duplex Capable; AUTO (Down)-The media converter will advertise Full Duplex Not Capable, Half Duplex Capable. |
| Fiber Fault Alert | The Fiber Fault Alert switch has meaning when Auto-Negotiation is disabled; Enabled (Default - Up); When the 1000Base-X receiver is off the 1000Base-X transmitter is turned off. Periodically the 1000Base-X receiver will be turned on for a short period to allow the condition to clear if the 1000Base-X link partner is using a similar feature; Disabled (Down) |
| Management ethernet port | 10/100/1000Base-T - RJ45; Auto- MDI/MDIX; Multimode dual LC Media Converter |
| Reset button | Recessed pinhole button resets module |
| Current | 0.42amps at 12vdc |
| Power Consumption | 4.98watts |
| Power | Blinking green during startup cycle Steady green: module has power and is ready; Red : error |
| Power / TST | This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink when in Loopback test mode. |
| Copper link on / Receive activity (LKC) | This green LED is operational only when power is applied. The LED is on when the 1000Base-T link is on and flashes with a 50% duty cycle when data is received. The LED will slow blink when the 1000Base-T interface has been taken down as a result of a fault on the 1000Base-T interface. |
| Storage temperature | minimum range of -25° C to 70° C (-13° F to 158° F) |
| Emissions | FCC Part 15 Class A, EN55022 Class A |
| Fiber link on / Receive activity (LKF) | This green LED is operational only when power is applied. The LED is on when the 1000Base-X link is on and flashes with a 50% duty cycle when data is received. The LED will slow blink when the 1000Base-X interface has been taken down as a result of a fault on the 1000Base-T interface. |
| 100/1000 | Green - 1000 Mbps link; Yellow - 100 Mbps link; Off - 10 Mbps or no Link |
| Management console port | RS232 Serial RJ45 - Cisco pinout for use with standard CAT5 |
| ALM | Red alarm indicator activated when an alert event occurs |
| Operating Humidity | 5% to 90% non-condensing |
| Laser Safety | EN 60825-1:2007 |
| Pause | When Fiber Auto Negotiation is disabled Pause should only be enabled when all devices connected to the media converter support pause; Enabled(Default)- The Media converter will advertise Pause capable, Asymmetric pause not needed during Auto-Negotiation; Disabled- The Media converter will advertise that it does not have Pause capability during Auto-Negotiation. |
| Electrical Safety | UL 60950-1 |
| 1000Base-T | RJ45 connector, 4 pair CAT 5 UTP cable or cable; Magnetic Isolation - 1.5kv |
| Dimentions | 175 x 145 x 23 mm |
| Bit Error Rate (BER) | u003c10-12 |
| LKC | Green indicator indicating an active Ethernet link. Blinking indicates RX and TX of data |
| Heat Output ( BTU/HR ) | 17 |
| Input Supply Voltage | ( 12 vDC Nominal ) |
| Remote Loopback | The media converter can perform a loopback on the 1000Base-X fiber interface; Disabled (Default - Up); Enabled- The 1000Base-X receiver is looped to the 1000Base-X transmitter. The 1000Base-T transmitter is taken off the interface. |
| Immunity | EN55024 |
| Universal AC/DC adapter | 100-240v AC, regulated DC adapter included |
| Auto-Negotiation | Enabled (Default - Up)In this mode the 1000Base-X and the 1000Base-T will negotiate to the HCD of the two link partners. The 1000Base-X will link up after the negotiation is completed and the 1000Base-T has linked up; Disabled- The 1000Base-X will not use auto negotiation. The 1000Base-T will negotiate to the HCD of the Switch settings and the link partner. |
| Operating temperature | 0° C to 50° C (32° F to 122° F) |
| Operating Altitude | Up to 3,048 meters (10,000 feet) |
| Power Connector | 5.5mm x 9.5mm x 2.1mm barrel socket |
| Country of Origin (subject to change) | Canada |
| Package Quantity | 1 |
Smi-1000-M2Lc05 Media Convertr
$1266,99
Free shipping will be applied on orders over $50
SMI-1000-M2LC05 - Managed Gigabit Media Converter: 1000BASE-T (RJ-45) [100 m/328 ft.] to 1000BASE-SX 850nm multimode (LC) [550 m/1804 ft.] - USA Power Cord
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.