| Property | Value |
|---|---|
| Item | Linear Shaft |
| Shaft Dia. | 1 1/2 in |
| Length | 16 in |
| Material | Carbon Steel |
| Travel Length (In.) | 12 in |
| Dia. Tolerance Max. | 1.4997 in |
| Thread Size | 5/8-11 |
| Mounting Hole Center to Center | Not Applicable |
| Type | Both Ends Threaded Shaft |
| Dimension M | 1-8 |
| Dimension G | 12.000 |
| Dia. Tolerance Min. | 1.499 in |
| Min. Surface Hardness | 60 RC |
| Dimension L | 16 |
| Dimension F | 2 in |
| Dimension P | 1 in |
| For Use With | Slide/Sleeve Bearing |
| Temp. Range (F) | 230 Degrees F |
| Mounting End Dia. (In.) | 1 in |
| Thread Length (In.) | 1.25 in |
| System of Measurement | Inch |
| Surface Roughness | 16 uin |
| Diameter Tolerance Class | g6 |
| Min. - Max. Shaft Diameter | 1.499 in - 1.4997 in |
| End Type | Both Ends Threaded |
| Overall Length | 16 in |
| Diameter Tolerance - Maximum | 1.5 in |
| Core Type | Solid |
| End Thread Length | 1.25 in |
| Diameter | 1 1/2 in |
| Surface Hardness - Minimum | 60 HRC |
| Number of Mounting Holes | Not Applicable |
| Weight Per Meter | Not Applicable |
| Mounting Hole Thread Size | Not Applicable |
| Diameter Tolerance - Minimum | 1.499 in |
| Tolerance Class | g6 |
| Mounting Hole Diameter | Not Applicable |
| Roughness | 0.4 um Ra |
| End Thread Diameter | 1 in |
| End Thread Size | #1-8 |
| Shaft Type | Both Ends Threaded Shaft |
| Series | SFW |
| Mounting Hole Center to Shaft End | Not Applicable |
| Mounting Hole Type | Not Applicable |
| Operating Temperature - Maximum | 230 Degrees F |
| Country of Origin (subject to change) | Germany |
| Package Quantity | 1 |
Shaft, Steel, 1.500 In D, 16.00 In, Nb, Mfr#: SFW24X16FS116
$115,99
Free shipping will be applied on orders over $50
Linear Shaft, System of Measurement Inch, Diameter 1 1/2 in, Shaft Type Both Ends Threaded Shaft, End Type Both Ends Threaded, Core Type Solid, Overall Length 16 in, Surface Hardness - Minimum 60 HRC, Material Carbon Steel, End Thread Size #1-8, Mounting Hole Thread Size Not Applicable, Diameter Tolerance - Minimum 1.499 in, Diameter Tolerance - Maximum 1.5 in, Mounting Hole Center to Center Not Applicable, Mounting Hole Center to Shaft End Not Applicable, End Thread Length 1.25 in
9999 in stock
Must order in multiples of 1
Subtotal:
$115.99
You must be logged in to post a review.
Reviews
There are no reviews yet.