| Property | Value |
|---|---|
| Accelerated Speed | 14 fps |
| Overall Height (In.) | 3.435 in |
| Dimension I | 2.375 in |
| Bore Dia. (In.) | 1.5 in |
| Dimension H | 0.3438 in |
| Static Load Capacity (Lb.) | 14,100 lb |
| Bolt Size | 0.3125 in |
| Dimension F | 0.5 in |
| Dimension E | 3.5 in |
| Dimension G | 2 in |
| Flange Thickness (In.) | 0.5 in |
| Overall Width (In.) | 1.25 in |
| Dimension B | 1.375 in |
| Temp. Range (F) | 0 - 400 |
| Liner | Frelon(TM) Gold |
| Mounting Hole Dia. (In.) | 0.3438 in |
| Steady State Speed | 5 fps |
| Dimension A | 2 in |
| Dimension C | 1.25 in |
| Mounting Hole Dia. (mm) | 0.344 in |
| Body Width (In.) | 2 in |
| Lubrication | No Lubrication System |
| Dimension D | 3.435 in |
| Mounting Surface to Shaft Center (In.) | 2 in |
| Overall Length (In.) | 4.375 in |
| Dynamic Load Capacity (Lb.) | 14,100 lb |
| Dimension H1 | 5/16 |
| Material | Aluminum |
| Item | Mounted Linear Bearing |
| Type | End Support Block |
| For Use With | Linear Shafting |
| Nominal Inside Diameter | 1 1/2 in |
| Number of Mounting Holes | 2 |
| Series | Dayton |
| Mounting Hole Center to Center Distance | 3.5 in |
| Maximum Operating Temperature | 400 Degrees F |
| Finish | Anodized |
| Top Length | 2.25 in |
| System of Measurement | Inch |
| Flange Width | 1.25 in |
| Minimum Operating Temperature | 0 Degrees F |
| Flange Thickness | 0.5 in |
| Construction | Anodized Aluminum |
| Mounting Surface to Shaft Center | 2 in |
| Overall Height | 3.435 in |
| Operating Temperature - Maximum | 400 Degrees F |
| Mounting Hole Center to Center | 3.5 in |
| Mounting Hole Size | 0.344 in |
| Operating Temperature - Minimum | 0 Degrees F |
| Base Width | 1.25 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Shaft Support, 1.500 In Bore, 3.435 In H, Dayton, Mfr#: 2CNV3
$146,99
Free shipping will be applied on orders over $50
Mounted Linear Bearing, System of Measurement Inch, For Use With Linear Shafting, Nominal Inside Diameter 1 1/2 in, Mounting Hole Center to Center 3.5 in, Overall Height 3.435 in, Mounting Surface to Shaft Center 2 in, Finish Anodized, Material Aluminum, Series Dayton, Bolt Size 0.3125 in, Base Width 1.25 in, Mounting Hole Size 0.344 in, Number of Mounting Holes 2, Operating Temperature - Maximum 400 Degrees F, Operating Temperature - Minimum 0 Degrees F, Top Length 2.25 in
9999 in stock
Must order in multiples of 1
Subtotal:
$146.99
You must be logged in to post a review.
Reviews
There are no reviews yet.