| Property | Value |
|---|---|
| Item - Self Priming Pumps | Self Priming Centrifugal Pump |
| Item | Centrifugal Pump |
| HP - Pumps | 1 hp |
| Inlet | 1-1/2 in NPT |
| Outlet | 1-1/2 in NPT |
| Voltage - Pumps | 115/208 to 230V AC |
| Wetted Materials | Buna-N, Carbon, Cast Iron, Ceramic, Stainless Steel |
| Phase - Pumps | 1 |
| HP | 1 |
| Max. Head - Pumps | 52 ft |
| Voltage | 115/208-230 |
| Outlet Size - Pumps | 1-1/2 in NPT |
| Best Efficiency Range GPM @ Head | 21 to 62 gpm @ 45 to 22 ft |
| Seal Material | Buna-N, Carbon, Ceramic, Stainless Steel |
| Suction Lift | 6 ft. |
| Max. Dia. Solids - Pumps | 3/8 in |
| Max. Pressure - Pumps | 22 psi |
| Motor RPM | 3,450 RPM |
| Motor Enclosure - Pumps | Totally Enclosed Fan-Cooled |
| Housing Material - Pumps | Cast Iron |
| Inlet Size - Pumps | 1-1/2 in NPT |
| Max. Case Pressure | 75 psi |
| Suction Lift - Pumps | 6 ft |
| GPM of Water @ 5 Ft. of Head | 80 |
| Impeller Material | Cast Iron |
| Max. Pressure | 22.5 psi |
| Max. Head | 52 ft. |
| GPM of Water @ 20 Ft. of Head | 65 |
| GPM of Water @ 50 Ft. of Head | 5 |
| Housing Material | Cast iron |
| GPM of Water @ 30 Ft. of Head | 54 |
| Duty | Continuous |
| Max. Liquid Temp. | 200 Degrees F |
| Bearing Type | Ball |
| GPM of Water @ 15 Ft. of Head | 70 |
| GPM of Water @ 10 Ft. of Head | 76 |
| Amps | 12.2/6.3-6.1 |
| Motor Design | Capacitor-Start |
| Max. Temp - Pumps | 200 Degrees F |
| Agency Compliance | c UL us |
| Impeller Type | Semi Open |
| Motor Type | Single Phase |
| Frame | 56J |
| Port Rotation | Single |
| Self-Priming | Yes |
| Duty - Pumps | Continuous |
| Width | 6 1/8 in |
| Includes | Manual |
| GPM of Water @ 40 Ft. of Head | 36 |
| Port Rotation - Pumps | No |
| Max. Dia. Solids | 3/8 |
| Height | 9 1/2 in |
| Hz | 60 |
| Manufacturers Warranty Length | 1 yr |
| Max. Specific Gravity | 1.3 |
| Inlet Pressure | 75 psi |
| Length | 18 3/32 in |
| Motor Enclosure | Totally Enclosed Fan Cooled (TEFC) |
| Phase | Single |
| Overall Width | 6.1 in |
| Overall Length | 18 in |
| Overall Height | 9.5 in |
| Standards | cULus Listed |
| Shaft Material | Stainless Steel |
| Seal Type | Mechanical |
| Pump Housing Material | Cast Iron |
| Flow Rate @ 20 ft of Head (Maximum) | 65 gpm |
| Flow Rate @ 50 ft of Head (Maximum) | 5 gpm |
| Flow Rate @ 140 ft of Head (Maximum) | Not Applicable |
| Horsepower | 1 hp |
| Flow Rate @ 90 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
| Nameplate Voltage | 115/208-230V AC |
| Flow Rate @ 100 ft of Head (Maximum) | Not Applicable |
| Maximum Feet of Head | 50 ft |
| Motor Enclosure Type | TEFC |
| Compatible Discharge Pipe Size | 1 1/2 in |
| Best Efficiency Flow | 21 to 62 gpm |
| Flow Rate @ 300 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 220 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 200 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 120 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
| Compatible Intake Pipe Size | 1 1/2 in |
| Frequency | 60 Hz |
| Impeller Design | Semi-Open |
| Suction Lift (Maximum) | 6 ft |
| Flow Rate @ 160 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 240 ft of Head (Maximum) | Not Applicable |
| Wetted Material | Buna-N, Carbon, Cast Iron, Ceramic, Stainless Steel |
| Flow Rate @ 280 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 40 ft of Head (Maximum) | 36 gpm |
| For Use With Potable Systems | No |
| Flow Rate @ 60 ft of Head (Maximum) | Not Applicable |
| Solid Diameter (Maximum) | 0.38 in |
| Discharge Type | NPT |
| Flow Rate @ 260 ft of Head (Maximum) | Not Applicable |
| Motor Frame Designation | 56J |
| Flow Rate @ 180 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 70 ft of Head (Maximum) | Not Applicable |
| Manufacturer Warranty Length | 1 yr |
| Intake Type | NPT |
| Flow Rate @ 10 ft of Head (Maximum) | 76 gpm |
| Shut Off Pressure (Maximum) | 22 psi |
| Intake and Discharge Size | 1 1/2 in , 1 1/2 in |
| Flow Rate @ 15 ft of Head (Maximum) | 71 gpm |
| Flow Rate @ 5 ft of Head (Maximum) | 80 gpm |
| Duty Cycle | Continuous |
| Specific Gravity (Maximum) | 1.3 |
| Flow Rate @ 30 ft of Head (Maximum) | 54 gpm |
| Nominal Voltage | 115/208-230V AC |
| Best Efficiency Head | 22 to 45 ft |
| Maximum RPM | 3,450 RPM |
| Country of Origin (subject to change) | India |
| Package Quantity | 1 |
Self Priming Centrifugal Pump, 1 hp, 115/208 to 230V AC, 1 Phase, 52 ft Max Head, Dayton, Mfr#: 2ZXP3
$579,99
Free shipping will be applied on orders over $50
Centrifugal Pump, Phase Single, Pump Housing Material Cast Iron, Horsepower 1 hp, Nameplate Voltage 115/208-230V AC, Flow Rate @ 40 ft of Head (Maximum) 36 gpm, Maximum Feet of Head 50 ft, Compatible Intake Pipe Size 1 1/2 in, Intake Type NPT, Compatible Discharge Pipe Size 1 1/2 in, Discharge Type NPT, Motor Enclosure Totally Enclosed Fan Cooled, Flow Rate @ 5 ft of Head (Maximum) 80 gpm, Flow Rate @ 10 ft of Head (Maximum) 76 gpm, Flow Rate @ 15 ft of Head (Maximum) 71 gpm
9999 in stock
Must order in multiples of 1
Subtotal:
$579.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.