| Property | Value |
|---|---|
| HP | 2 hp |
| Voltage | 115/208-230 |
| Wetted Materials | CI,Bronze,Carbon,Ceramic,Buna N |
| Seal Material | Buna-N/Carbon/Ceramic (Face) |
| Max. Pressure | 300 psi |
| GPM @ 50 PSI | 11.5 |
| Amps | 20.8/10.4 |
| GPM @ 20 PSI | 13.2 |
| GPM @ 30 PSI | 12.5 |
| Max. Case Pressure | 300 psi |
| Agency Compliance | UL and CSA on Motor Only |
| Max. Dia. Solids | 25 Microns |
| Housing Material | Cast iron |
| Bearing Type | Sealed Ball Bearing (Motor Bearing) |
| Best Efficiency GPM @ Head | 10.8 gpm @ 69 psi ft |
| Includes | Cast Casing |
| Inlet Pressure | 200 psi |
| Motor Type | Capacitor-Start |
| GPM @ 100 PSI | 9.5 |
| Motor Enclosure | Totally Enclosed Fan Cooled (TEFC) |
| Width | 8 1/2 in |
| Phase | Single |
| Item | Turbine Pump |
| Impeller Type | Regenerative Turbine |
| Manufacturers Warranty Length | 1 yr |
| Port Rotation | 90 Degrees Increments |
| Frame | 56c |
| Outlet | 1 in |
| Max. Specific Gravity | 1 |
| Inlet (In.) | 1 |
| Height | 8 5/8 in |
| GPM @ 10 PSI | 13.6 |
| Impeller Material | Bronze |
| Duty | Continuous |
| GPM @ 75 PSI | 10.5 |
| Inlet | 1 in |
| Overall Height | 8.63 in |
| Overall Width | 8.5 in |
| Standards | CSA Certified (Motor Only), UL Listed (Motor Only) |
| Compatible with Media Type | Water |
| Compatible Intake Pipe Size | 1 in |
| Nameplate Voltage | 115/208-230V AC |
| Specific Gravity (Maximum) | 1 |
| Flow Rate @ 200 psi | 4.5 gpm |
| Minimum Flow Rate | 9.5 gpm |
| Intake Type | NPT |
| Maximum Flow Rate | 13.6 gpm |
| Flow Rate @ 220 psi | Not Applicable |
| Intake and Discharge Size | 1 in , 1 in |
| Flow Rate @ 100 psi | 9.4 gpm |
| Manufacturer Warranty Length | 1 yr |
| Flow Rate @ 80 psi | 10.3 gpm |
| Flow Rate @ 30 psi | 12.7 gpm |
| Flow Rate @ 50 psi | 11.7 gpm |
| NPSHr | 200 psi |
| Solid Diameter (Maximum) | 25 micron |
| Case Pressure (Maximum) | 300 psi |
| Impeller Design | Regenerative Turbine |
| Flow Rate @ 120 psi | 8.5 gpm |
| Seal Type | Type 21 |
| Discharge Rotation | 90 Degrees Increments |
| Flow Rate @ 10 psi | 13.6 gpm |
| Duty Cycle | Continuous |
| Flow Rate @ 60 psi | 11.2 gpm |
| Flow Rate @ 260 psi | Not Applicable |
| Motor Frame Designation | 56C |
| Motor Enclosure Type | TEFC |
| Flow Rate @ 90 psi | 9.8 gpm |
| Pump Housing Material | Cast Iron |
| Shut Off Pressure (Maximum) | 150 psi |
| Flow Rate @ 140 psi | Not Applicable |
| Flow Rate @ 240 psi | Not Applicable |
| Flow Rate @ 20 psi | 13.2 gpm |
| Flow Rate @ 40 psi | 12.2 gpm |
| Flow Rate @ 180 psi | Not Applicable |
| Compatible Discharge Pipe Size | 1 in |
| Horsepower | 2 hp |
| Flow Rate @ 15 psi | Not Applicable |
| Best Efficiency Head | 69 ft |
| Discharge Type | NPT |
| Wetted Material | Bronze, Buna-N, Carbon, Cast Iron, Ceramic |
| Flow Rate @ 160 psi | Not Applicable |
| Flow Rate @ 70 psi | 10.5 gpm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Pump, Turbine, 2 HP, Dayton, Mfr#: 4UP55
$1301,06
Free shipping will be applied on orders over $50
Turbine Pump, Phase Single, Pump Housing Material Cast Iron, Motor Enclosure Totally Enclosed Fan Cooled, Horsepower 2 hp, Nameplate Voltage 115/208-230V AC, Shut Off Pressure (Maximum) 150 psi, Maximum Flow Rate 13.6 gpm, Flow Rate @ 10 psi 13.6 gpm, Flow Rate @ 20 psi 13.2 gpm, Flow Rate @ 30 psi 12.7 gpm, Compatible Intake Pipe Size 1 in, Compatible Discharge Pipe Size 1 in, Discharge Type NPT, Motor Type Capacitor-Start, Best Efficiency Head 69 ft, Case Pressure (Maximum) 300 psi
9999 in stock
Must order in multiples of 1
Subtotal:
$1301.06
You must be logged in to post a review.
Reviews
There are no reviews yet.