| Property | Value |
|---|---|
| Item | Pump |
| HP | 1/2 hp |
| Voltage | 115/230 |
| Amps | 11.2/5.6 |
| Motor Enclosure | Open Dripproof |
| NEMA Motor Frame | 56YZ |
| Inlet/Outlet (In.) | 3/4 NPT |
| Max. Head (Ft.) | 80 ft |
| Max. Pressure (PSI) | 34.6 psi |
| Length (In.) | 12 19/64 in |
| Prime in Feet | 10 Feet and 15 Feet with Foot Valve and Pumps Flooded |
| Includes | Carrying Handle, Manual |
| Seal | Nitrile Lip |
| RPM | 1,725 RPM |
| Shaft Material | Stainless Steel |
| GPM of Water @ 20 Ft. of Head | 10.5 gpm |
| Width (In.) | 6 45/64 in |
| Height (In.) | 12 in |
| GPM of Water @ 10 Ft. of Head | 11.9 gpm |
| Type | Flexible Impeller |
| Application | Pumps are used in a wide range of commercial, industrial, and agricultural applications where non-abrasive fluids compatible with the pump component materials are being used. |
| Temp. Range (F) | 0 to 180 |
| Motor Type | ODP |
| Max. Viscosity | 5,000 SUS |
| GPM of Water @ 30 Ft. of Head | 9.6 gpm |
| Cord Length | Not Applicable |
| Housing Material | Brass |
| Max. SSU @ 1725 RPM | 5,000 SUS |
| GPM of Water @ 40 Ft. of Head | 8.6 gpm |
| Suction Lift (Ft.) | 10 |
| Impeller Material | Buna-N |
| GPM of Water @ 60 Ft. of Head | 5.4 gpm |
| Characteristics | Positive Displacement Pumping Action Without Metal-to-Metal Contact. |
| Self-Priming | Yes |
| Overall Length | 13.9 in |
| Overall Width | 6.5 in |
| Overall Height | 10.7 in |
| Phase | Single |
| Priming | Self-Priming |
| Discharge Connection Size | 3/4 in |
| Flow Rate @ 1 ft of Head - Maximum | 12.5 gpm |
| Seal Material | Buna-N |
| Impeller Diameter | 2 1/2 in |
| Media Temperature - Minimum | 32 Degrees F |
| Flow Rate @ 10 ft of Head - Maximum | 11.9 gpm |
| Wetted Material | Brass, Buna-N, Stainless Steel |
| Flow Rate @ 60 ft of Head - Maximum | 5.4 gpm |
| Frequency | 60 Hz |
| Motor Mounting Type | Horizontal |
| Motor Speed - Maximum | 1,725 RPM |
| Operating Pressure - Maximum | 34.6 psi |
| Flow Rate @ 30 ft of Head - Maximum | 9.6 gpm |
| Shaft Outer Diameter | 5/8 in |
| Compatible Motor Frame | 56YZ |
| Bearing Type | Ball |
| Nameplate Voltage | 115 to 230V AC |
| Suction Lift - Maximum | 10 ft |
| Bearing Material | Stainless Steel |
| Feet of Head - Maximum | 80 ft of head |
| Viscosity - Maximum | 5,000 SUS |
| Media Temperature - Maximum | 180 Degrees F |
| Flow Rate @ 40 ft of Head - Maximum | 8.6 gpm |
| Horsepower - Maximum | 1/2 hp |
| Seal Type | Lip |
| Media Intake Connection Type | FNPT |
| Flow Rate @ 50 ft of Head - Maximum | 6.5 gpm |
| Media Intake Connection Size | 3/4 in |
| For Media Type | Hydraulic Fluids, Petroleum Oils, Silicone Grease |
| Current | 6.1 A |
| Discharge Connection Type | FNPT |
| Flow Rate @ 20 ft of Head - Maximum | 10.5 gpm |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Pump, Bronze, 1/2 HP, 115/230V, 11.2/5.6Amps, Dayton, Mfr#: 3ABZ5
$1158,99
Free shipping will be applied on orders over $50
Pump, Housing Material Brass, Horsepower - Maximum 1/2 hp, Nameplate Voltage 115 to 230V AC, Flow Rate @ 10 ft of Head - Maximum 11.9 gpm, Viscosity - Maximum 5,000 SUS, Feet of Head - Maximum 80 ft of head, Discharge Connection Size 3/4 in, Media Intake Connection Size 3/4 in, Media Intake Connection Type FNPT, Impeller Material Buna-N, Discharge Connection Type FNPT, Cord Length Not Applicable, Priming Self-Priming, Operating Pressure - Maximum 34.6 psi, Suction Lift - Maximum 10 ft
9999 in stock
Must order in multiples of 1
Subtotal:
$1158.99
You must be logged in to post a review.
Reviews
There are no reviews yet.