| Property | Value |
|---|---|
| HP - Pumps | 3 hp |
| Voltage - Pumps | 120/240V AC |
| Phase - Pumps | 1 |
| Housing Material - Pumps | Cast Iron |
| Inlet Size - Pumps | 2 in NPT |
| Outlet Size - Pumps | 1-1/2 in NPT |
| Max. Head | 95 ft |
| Max. Pressure - Pumps | 41 psi |
| Motor Enclosure - Pumps | Open Dripproof |
| Amps | 28/14.7-14 |
| Voltage | 115/208-230VAC |
| Hz | 60 |
| Manufacturers Warranty Length | 1 yr |
| Outlet | 1-1/2 |
| Frame | 182JM |
| Housing Material | Cast iron |
| Max. Specific Gravity | 1.0 |
| Port Rotation | 90 Increments |
| Max. Pressure | 41 psi |
| GPM of Water @ 40 Ft. of Head | 139 |
| Item - Straight Centrifugal Pumps | Straight Centrifugal High Head Pump |
| Best Efficiency Range GPM @ Head | 73 to 135 gpm @ 100 to 65 ft |
| HP | 3 |
| Height | 9 in |
| Wetted Materials | Stainless Steel, Carbon, Cast Iron, Bronze, Ceramic, Buna-N |
| Motor RPM | 3,500 RPM |
| GPM of Water @ 90 Ft. of Head | 47 |
| Max. Case Pressure | 175 psi |
| GPM of Water @ 80 Ft. of Head | 87 |
| Item | Centrifugal Pump |
| Inlet | 2 |
| Inlet Pressure | 100 psi |
| Width | 12 1/4 in |
| Length | 20 5/16 in |
| Max. GPM @ Head | 150 @ 20 ft |
| Min. GPM @ Head | 20 @ 92 ft |
| GPM of Water @ 50 Ft. of Head | 132 |
| Max. Liquid Temp. | 212 Degrees F |
| Motor Type | JM |
| Seal Material | 316 Stainless Steel, Buna Elastomer, Carbon, Ceramic |
| Duty | Continuous |
| Phase | Single |
| GPM of Water @ 70 Ft. of Head | 100 |
| Motor Enclosure | Totally Enclosed Fan Cooled (TEFC) |
| Best Efficiency GPM @ Head | 100 @ 75 ft |
| Impeller Type | Closed |
| GPM of Water @ 60 Ft. of Head | 120 |
| Max. Dia. Solids | 5/16 in |
| Impeller Material | Bronze |
| Impeller Design | Closed |
| Best Efficiency Flow | 100 gpm |
| Motor Frame Designation | 182JM |
| Intake and Discharge Size | 2 in , 1 1/2 in |
| Flow Rate @ 100 ft of Head (Maximum) | Not Applicable |
| Minimum Flow Rate | 60 gpm |
| Flow Rate @ 120 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
| Shut Off Pressure (Maximum) | 175 psi |
| For Use With Potable Systems | Yes |
| Priming | Manual |
| Discharge Type | NPT |
| Flow Rate @ 30 ft of Head (Maximum) | 145 gpm |
| Flow Rate @ 240 ft of Head (Maximum) | Not Applicable |
| Overall Height | 9 in |
| Compatible with Media Type | Water |
| Wetted Material | 316 Stainless Steel, Bronze, Buna-N, Carbon, Ceramic |
| Overall Length | 24.5 in |
| Flow Rate @ 20 ft of Head (Maximum) | 150 gpm |
| Shaft Material | Stainless Steel |
| Compatible Discharge Pipe Size | 1 1/2 in |
| Manufacturer Warranty Length | 1 yr |
| Nominal Voltage | 115/208-230V AC |
| Flow Rate @ 80 ft of Head (Maximum) | 85 gpm |
| Flow Rate @ 260 ft of Head (Maximum) | Not Applicable |
| Frequency | 60 Hz |
| Flow Rate @ 60 ft of Head (Maximum) | 120 gpm |
| Maximum Flow Rate | 150 gpm |
| Flow Rate @ 40 ft of Head (Maximum) | 140 gpm |
| Seal Type | Mechanical Type 21 |
| Maximum Feet of Head | 95 ft |
| Flow Rate @ 90 ft of Head (Maximum) | 40 gpm |
| Specific Gravity (Maximum) | 1 |
| Best Efficiency Head | 75 ft |
| Horsepower | 3 hp |
| Duty Cycle | Continuous |
| Pump Housing Material | Cast Iron |
| Flow Rate @ 200 ft of Head (Maximum) | Not Applicable |
| Mounting Orientation | Horizontal |
| Standards | ANSI 61, NSF Certified |
| Flow Rate @ 50 ft of Head (Maximum) | 130 gpm |
| Flow Rate @ 220 ft of Head (Maximum) | Not Applicable |
| Features | Back Pull Out to Reduce Maintenance Down Time, Dynamic Balancing, Renewable Wear Rings |
| Flow Rate @ 300 ft of Head (Maximum) | Not Applicable |
| Maximum RPM | 3,500 RPM |
| Maximum Media Temperature | 212 Degrees F |
| Intake Type | NPT |
| Series | 3656 |
| Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
| Solid Diameter (Maximum) | 0.31 in |
| Nameplate Voltage | 115/208-230V AC |
| Flow Rate @ 180 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 160 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 10 ft of Head (Maximum) | Not Applicable |
| Overall Width | 8.6 in |
| Flow Rate @ 15 ft of Head (Maximum) | Not Applicable |
| Discharge Rotation | 90 Degrees Increments |
| Flow Rate @ 70 ft of Head (Maximum) | 105 gpm |
| Flow Rate @ 280 ft of Head (Maximum) | Not Applicable |
| Pumping Application | Booster Service, Irrigation, Liquid Transfer, Spraying Systems, Water Circulation |
| Compatible Intake Pipe Size | 2 in |
| Motor Enclosure Type | TEFC |
| Flow Rate @ 140 ft of Head (Maximum) | Not Applicable |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Cast Iron 3 HP Centrifugal Pump 115/208-230V, Goulds Water Technology, Mfr#: 3BF1H4D0
$3293,99
Free shipping will be applied on orders over $50
Centrifugal Pump, Phase Single, Pump Housing Material Cast Iron, Horsepower 3 hp, Nameplate Voltage 115/208-230V AC, Flow Rate @ 40 ft of Head (Maximum) 140 gpm, Flow Rate @ 60 ft of Head (Maximum) 120 gpm, Flow Rate @ 80 ft of Head (Maximum) 85 gpm, Maximum Feet of Head 95 ft, Compatible Intake Pipe Size 2 in, Intake Type NPT, Compatible Discharge Pipe Size 1 1/2 in, Discharge Type NPT, Motor Enclosure Totally Enclosed Fan Cooled, Maximum Flow Rate 150 gpm
9999 in stock
Must order in multiples of 1
Subtotal:
$3293.99
You must be logged in to post a review.
Reviews
There are no reviews yet.