| Property | Value |
|---|---|
| Booster Pump Type | Multi-Stage Booster Pump |
| Item | Booster Pump |
| HP - Pumps | 1/3 hp |
| Voltage - Pumps | 115/230V AC |
| Phase - Pumps | 1 |
| Inlet Size - Pumps | 3/4 in NPT |
| Outlet Size - Pumps | 3/4 in NPT |
| Number of Stages - Pumps | 7 |
| Max. Pressure - Pumps | 90 psi |
| Housing Material - Pumps | Cast Iron |
| Motor Enclosure - Pumps | Open Dripproof |
| GPM @ 20 PSI | 7.8 |
| Suction Lift | 10 ft |
| Hz | 60 |
| Max. Pressure | 90 psi |
| Motor Ambient Temp. Rating | 65 Degrees C |
| Phase | Single |
| Motor Enclosure | Open Dripproof (ODP) |
| Frame | 56J |
| Wetted Materials | 304 Stainless Steel,Cast Iron, Buna-N, Carbon-Ceramic, Noryl, Nylon, Polycarbonate |
| Duty | Continuous |
| Max. Liquid Temp. | 140 Degrees F |
| GPM @ 80 PSI | 2.9 |
| Voltage | 115/230 |
| Housing Material | Cast iron |
| Agency Compliance | c UL us |
| GPM @ 10 PSI | 9.3 |
| Pump Mounting Position | Horizontal or Vertical with Inlet Down |
| Max. Case Pressure | 300 psi |
| Stages | 7 |
| Width | 6 3/4 in |
| Seal Material | Buna-N, Carbon, Ceramic, Stainless Steel |
| Manufacturers Warranty Length | 1 yr |
| HP | 1/3 |
| Inlet | 3/4 |
| Motor Type | Capacitor-Start/Run |
| Amps | 7.5/3.4 A |
| Impeller Material | Noryl |
| Outlet | 3/4 |
| Length | 22 1/8 in |
| GPM @ 60 PSI | 5.1 |
| Height | 8 3/4 in |
| Bearing Type | Ball |
| GPM @ 40 PSI | 6.8 |
| Includes | Manual |
| Impeller Type | Closed |
| Overall Width | 6.75 in |
| Overall Length | 22.13 in |
| Standards | cULus Listed |
| Overall Height | 8.75 in |
| Compatible Discharge Pipe Size | 3/4 in |
| Manufacturer Warranty Length | 1 yr |
| Nameplate Voltage | 115/230V AC |
| Pump Housing Material | Cast Iron |
| Flow Rate @ 50 psi | 6 gpm |
| Nominal Voltage | 115/230V AC |
| Flow Rate @ 30 psi | 7.3 gpm |
| Motor Enclosure Type | ODP |
| Compatible with Media Type | Water |
| Mounting Orientation | Horizontal |
| Motor Frame Designation | 56J NEMA |
| Flow Rate @ 80 psi | 2.9 gpm |
| Frequency | 60 Hz |
| Number of Stages | 7 |
| Duty Cycle | Continuous |
| Flow Rate @ 70 psi | 4 gpm |
| Intake Size | 3/4 in |
| For Use With Systems | Non-Potable |
| Motor Ambient Temperature (Maximum) | 149 Degrees F |
| Maximum Media Temperature | 140 Degrees F |
| Horsepower | 1/3 hp |
| Wetted Material | 304 Stainless Steel, Buna-N, Carbon, Cast Iron, Ceramic, Noryl, Nylon, Polycarbonate |
| Discharge Type | NPT |
| Flow Rate @ 20 psi | 7.8 gpm |
| Impeller Design | Closed |
| Flow Rate @ 10 psi | 9.3 gpm |
| Intake and Discharge Size | 3/4 in , 3/4 in |
| Maximum RPM | 3,450 RPM |
| Suction Lift (Maximum) | 10 ft |
| Flow Rate @ 90 psi | 0 gpm |
| Intake Type | NPT |
| Flow Rate @ 40 psi | 6.8 gpm |
| Pumping Application | Filtration |
| Motor Ambient Temperature (Minimum) | 65 Degrees F |
| Priming | Self-Priming |
| Compatible Intake Pipe Size | 3/4 in |
| Flow Rate @ 60 psi | 5.1 gpm |
| For Use With Potable Systems | No |
| Shut Off Pressure (Maximum) | 90 psi |
| Case Pressure (Maximum) | 300 psi |
| Country of Origin (subject to change) | India |
| Package Quantity | 1 |
Multi-Stage Booster Pump, 1/3 hp, 120/240V AC, 1 Phase, 3/4 in NPT Inlet Size, 7 Stage, Dayton, Mfr#: 45MW66
$529,99
Free shipping will be applied on orders over $50
Booster Pump, Phase Single, Pump Housing Material Cast Iron, Motor Enclosure Open Dripproof, Horsepower 1/3 hp, Nameplate Voltage 115/230V AC, Flow Rate @ 10 psi 9.3 gpm, Flow Rate @ 20 psi 7.8 gpm, Flow Rate @ 30 psi 7.3 gpm, Flow Rate @ 40 psi 6.8 gpm, Flow Rate @ 50 psi 6 gpm, Flow Rate @ 60 psi 5.1 gpm, Flow Rate @ 70 psi 4 gpm, Flow Rate @ 80 psi 2.9 gpm, Flow Rate @ 90 psi 0 gpm, Shut Off Pressure (Maximum) 90 psi, Compatible Intake Pipe Size 3/4 in, Compatible Discharge Pipe Size 3/4 in
9999 in stock
Must order in multiples of 1
Subtotal:
$529.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.