Property | Value |
---|---|
Item | Submersible Pump Motor |
Phase | Single |
HP | 1 |
Voltage | 230V AC |
Number of Wires | 3 |
RPM Range | 1,725-3,450 |
Motor Service Factor | 1.15 |
Motor Bearings | Kingsbury |
Nameplate RPM | 3,450 |
Starter Required | No |
Stator Type | Hermetically Sealed |
Motor Thermal Protection | Built-In Lightning Arrestor |
Max. SF Amps | 10.4 |
Overload Relay Amp Setting | 8.2 A |
Lead Length | 4 ft |
Motor Sub Application | Water Wells |
Thrust Rating | 650 lb |
Shaft Material | Nitrile Rubber |
Full Load Amps | 8.2 |
Standards | ANSI/NSF 61 |
Motor Application | Pumps |
Motor Design | Capacitor-Start/Run |
Max. Ambient Temp. | 86 Degrees F |
Overload Relay Max. Amp Setting | 10.4 A |
Height | 13 1/4 in |
Hz | 60 Hz |
Motor Enclosure Design | Hermetically Sealed |
Diaphragm Type | Pressure Equalizing |
Overload Relay Required | No |
Motor Shaft Rotation | CCW |
Resilient Ring Dia. | Not Applicable |
Length Less Shaft | 11 3/4 in |
Motor Frame Material | Stainless Steel |
Shaft Length | 12 1/8 in |
NEMA Design | Not Applicable |
Motor Mounting Position | Vertical Shaft Up |
Conduit Box Location | Not Applicable |
Finish | Not Applicable |
Bolt Circle Dia. | 2 7/8 in |
Includes | Not Applicable |
Frame | Not Applicable |
Inverter Rating | Not Applicable |
Part Winding Start Capable | No |
Weight | 24 lb |
Manufacturers Warranty Length | 1 yr |
Duty Cycle | Continuous |
Ring to Ring Center | Not Applicable |
Overall Length | 11 3/4 in |
Ins. Class | B |
Nominal Efficiency | 62 % |
CC Number | Not Applicable |
Body Dia. | 3.8 in |
Inverter Rated | No |
Shaft Dia. | 5/8 in |
Conduit Box Position | Not Applicable |
Regreasable Bearings | Not Applicable |
Bearing Protection | Not Applicable |
Motor Shaft Design | Splined |
Motor Mounting Type | NEMA Pump Mounting |
No. of Speeds | Not Applicable |
Country of Origin (subject to change) | Mexico |
Package Quantity | 1 |
Pump Motor, 8.2A Full Load, 12-1/8"Shaft L, Little Giant Pump, Mfr#: 2145089003GS
$557,99
Free shipping will be applied on orders over $50
Submersible Pump Motor, Bearing Protection Not Applicable, Body Dia. 3.8 in, Bolt Circle Dia. 2 7/8 in, CC Number Not Applicable, Conduit Box Location Not Applicable, Conduit Box Position Not Applicable, Diaphragm Type Pressure Equalizing, Duty Cycle Continuous, Finish Not Applicable, Frame Not Applicable, Hz 60 Hz, Full Load Amps 8.2, Height 13 1/4 in, HP 1, Includes Not Applicable, Ins. Class B, Inverter Rated No, Inverter Rating Not Applicable, Lead Length 4 ft, Length Less Shaft 11 3/4 in
9999 in stock
Must order in multiples of 1
Subtotal:
$557.99
You must be logged in to post a review.
Reviews
There are no reviews yet.