| Property | Value |
|---|---|
| Item | Chemical Resistant Centrifugal Pump |
| HP | 1/3 hp |
| Housing Material | 304 Stainless Steel |
| Phase | Single |
| Voltage | 115/230 |
| Max. GPM @ Head | 21 gpm @ 5 ft |
| Max. Head | 48 ft |
| Inlet | 3/4 in NPT |
| Best Efficiency GPM @ Head | 10 gpm @ 26 ft |
| Outlet | 1/2 in NPT |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Hz | 60 |
| Inlet Pressure | 128 psi |
| Screw Material | Stainless Steel |
| GPM of Water @ 10 Ft. of Head | 20 |
| Service Factor | 1.6 |
| Max. Specific Gravity | 1.0 |
| Max. Dia. Solids | 1/8 in |
| GPM of Water @ 30 Ft. of Head | 4 |
| Wetted Materials | 304 Stainless Steel, Carbon, Ceramic, Viton |
| Port Rotation | 90 Degrees Increments |
| Width | 9 1/4 in |
| Drain Plug | No |
| Duty | Continuous |
| Impeller Material | 304 Stainless Steel |
| Seal Material | Carbon, Ceramic, Stainless Steel, Viton |
| Bearing Type | Ball |
| Seal Type | Mechanical |
| Manufacturers Warranty Length | 1 yr |
| Amps | 6.8/3.4 |
| GPM of Water @ 25 Ft. of Head | 11 |
| Height | 7 7/8 in |
| Motor RPM | 3,450 RPM |
| GPM of Water @ 20 Ft. of Head | 15 |
| Length | 12 5/8 in |
| Max. Fluid Viscosity | 31 SUS |
| Max. Case Pressure | 150 psi |
| Impeller Type | Closed |
| NEMA/IEC Frame | 56J |
| Motor Type | Permanent Split Capacitor |
| GPM of Water @ 5 Ft. of Head | 21 |
| Min. GPM @ Head | 1 gpm @ 40 ft |
| Shaft Material | Stainless Steel |
| Best Efficiency Range GPM @ Head | 11 to 19 gpm @ 28 to 6 ft |
| Agency Compliance | CUS |
| Max. Liquid Temp. | 200 Degrees F |
| GPM of Water @ 40 Ft. of Head | 1 |
| Application | Chemical Processing, Circulation, Cooling, Liquids Transfer, Pressure Boosting and Circulating |
| GPM of Water @ 15 Ft. of Head | 18 |
| Includes | Manual |
| Volute Material | 304 Stainless Steel |
| Overall Length | 12.6 in |
| Overall Height | 7.9 in |
| Overall Width | 9.3 in |
| Standards | CUS |
| Frequency | 60 Hz |
| Case Pressure (Maximum) | 150 psi |
| Flow Rate @ 25 ft of Head (Maximum) | 11 gpm |
| Viscosity (Maximum) | 31 SUS |
| Flow Rate @ 30 ft of Head (Maximum) | 10 gpm |
| Horsepower (Maximum) | 1/3 hp |
| Impeller Design | Closed |
| For Use With Potable Systems | No |
| Media Temperature (Minimum) | 40 Degrees F |
| Intake Pipe Type | NPT |
| Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
| Nameplate Voltage | 115/230V AC |
| Duty Cycle | Continuous |
| Discharge Port | 1/2 in NPT |
| Best Efficiency Head | 26 ft |
| Flow Rate @ 20 ft of Head (Maximum) | 18 gpm |
| Motor Speed (Maximum) | 3,450 RPM |
| Current | 6.8 or 3.4 A |
| Shaft Outer Diameter | 7/16 in |
| Intake Pipe Size | 3/4 in |
| Cord Length | Not Applicable |
| Flow Rate @ 60 ft of Head (Maximum) | Not Applicable |
| Priming | Manual |
| Flow Rate (Minimum) | 1 gpm |
| Specific Gravity (Maximum) | 1 |
| Shut Off Pressure (Maximum) | 150 psi |
| Compatible Motor Frame | 56J NEMA |
| Flow Rate @ 1 ft of Head (Maximum) | 24.5 gpm |
| Wetted Material | 304 Stainless Steel, Carbon, Ceramic, Viton |
| Ambient Temperature (Maximum) | 104 Degrees F |
| Electrical Connection Type | Not Applicable |
| Best Efficiency Flow | 10 gpm |
| Flow Rate @ 5 ft of Head (Maximum) | 23.5 gpm |
| Solid Diameter (Maximum) | 0.13 in |
| Discharge Pipe Type | NPT |
| Feet of Head (Maximum) | 50 ft |
| Flow Rate @ 15 ft of Head (Maximum) | 20 gpm |
| Flow Rate (Maximum) | 21 gpm |
| Discharge Pipe Size | 1/2 in |
| Flow Rate @ 10 ft of Head (Maximum) | 22 gpm |
| Ambient Temperature (Minimum) | 40 Degrees F |
| Flow Rate @ 70 ft of Head (Maximum) | Not Applicable |
| Discharge Rotation | 90 Degrees Increments |
| Media Temperature (Maximum) | 200 Degrees F |
| Suction Port | 3/4 in NPT |
| Flow Rate @ 40 ft of Head (Maximum) | 2 gpm |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Pump, 1/3 HP, 115/230V, 6.8/3.4 Amp, Dayton, Mfr#: 4JMW6
$579,99
Free shipping will be applied on orders over $50
Centrifugal Pump, Discharge Pipe Size 1/2 in, Discharge Pipe Type NPT, Feet of Head (Maximum) 50 ft, Flow Rate (Maximum) 21 gpm, Horsepower (Maximum) 1/3 hp, Housing Material 304 Stainless Steel, Impeller Design Closed, Impeller Material 304 Stainless Steel, Intake Pipe Size 3/4 in, Intake Pipe Type NPT, Media Temperature (Maximum) 200 Degrees F, Phase Single, Shut Off Pressure (Maximum) 150 psi, Viscosity (Maximum) 31 SUS, Flow Rate @ 10 ft of Head (Maximum) 22 gpm
9999 in stock
Must order in multiples of 1
Subtotal:
$579.99
You must be logged in to post a review.
Reviews
There are no reviews yet.