| Property | Value |
|---|---|
| Item | Progressive Cavity Pump |
| Min. RPM | 150 RPM |
| Max. RPM | 1,750 RPM |
| Required HP @ Lower RPM | 3/64 hp |
| Max. Viscosity | 20,000 cPs |
| Series | 300 |
| Width (In.) | 4 3/4 |
| Inlet/Outlet (In.) | 3/4 NPT |
| Particle Size | 8.0 mm |
| Seal Material | Carbon, Ceramic |
| Housing Material | Cast Iron |
| Flow Rate @ Max. RPM and 0 PSI | 15.0 gpm |
| Min. Fluid Temp. | 10 Degrees F |
| Min. Pressure (PSI) | 0 psi |
| Max. Fluid Temp. | 180 Degrees F |
| Application | Abrasive Slurries, Bridge Deck Flooding, Coatings, Dirty Oil, Drum Transfer, Feed Additives, Industrial Waste, Irrigation, Lubricants, Sewage Sampling, Swimming Pool Water |
| Seal Type | Mechanical |
| Required HP @ Higher RPM | 1/2 hp |
| Max. Pressure (PSI) | 40 psi |
| Voltage | Non-Motorized |
| Flow Rate @ Min. RPM and 0 PSI | 1.483 gpm |
| Height (In.) | 5 1/8 |
| Length (In.) | 12 5/8 |
| Overall Length | 12.6 in |
| Overall Width | 4.8 in |
| Overall Height | 5.1 in |
| Media Temperature (Maximum) | 160 Degrees F |
| Solid Diameter (Maximum) | 8 mm |
| Motor Speed (Minimum) | 150 RPM |
| Motor Enclosure | Not Applicable |
| Media Temperature (Minimum) | 10 Degrees F |
| Rotor Material | Stainless Steel |
| Discharge Connection Type | NPT |
| Intake Connection Type | NPT |
| Phase | Not Applicable |
| Viscosity (Maximum) | 20,000 cps |
| Frequency | Not Applicable |
| Suction Port | 3/4 in NPT |
| Stator Material | Buna-N |
| Intake Connection Size | 3/4 in |
| Horsepower (Maximum) | 1/2 hp |
| Motor Speed (Maximum) | 1,750 RPM |
| Pump Operation Type | Non-Motorized |
| Discharge Connection Size | 3/4 in |
| Operating Pressure (Maximum) | 40 psi |
| Discharge Port | 3/4 in NPT |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Progressive Cavity Pump, 40 psi, Moyno, Mfr#: 34401
$1189,32
Free shipping will be applied on orders over $50
Progressive Cavity Pump, Discharge Connection Size 3/4 in, Discharge Connection Type NPT, Horsepower (Maximum) 1/2 hp, Housing Material Cast Iron, Intake Connection Size 3/4 in, Intake Connection Type NPT, Media Temperature (Maximum) 160 Degrees F, Media Temperature (Minimum) 10 Degrees F, Operating Pressure (Maximum) 40 psi, Pump Operation Type Non-Motorized, Rotor Material Stainless Steel, Seal Material Carbon, Ceramic, Solid Diameter (Maximum) 8 mm, Stator Material Buna-N
9999 in stock
Must order in multiples of 1
Subtotal:
$1189.32
You must be logged in to post a review.
Reviews
There are no reviews yet.