| Property | Value |
|---|---|
| Item | Plastec Blower |
| Type | Direct Drive Forward Curve |
| Wheel Dia. (In.) | 7.875 in |
| Voltage | 115/230 |
| Motor HP | 1/4 hp |
| Motor Type | General Duty, Single Phase |
| Housing Finish | Polypropylene |
| Inlet Dia. (In.) | 6.3 in |
| Outlet Dia. (In.) | 6.62 in |
| Blower RPM | 1,725 RPM |
| Hz | 60 Hz |
| Motor Frame | 71 |
| Full Load Amps | 4.04/2.02 |
| Agency Compliance | AMCA and CSA certified, UL Listed |
| Wheel Material | Plastic |
| Max. Ambient Temp. (F) | -13 Degrees F |
| Wheel Width (In.) | 4.13 in |
| Height (In.) | 24.81 in |
| Max. Inlet Temp. (Deg. F) | 140 Degrees F |
| dBA @ 5 Feet | 56 dBA |
| Rotation | CCW |
| Bearing Type | Sealed, Permanently Lubricated Ball |
| CFM @ 1.250-In. SP | 500 |
| Depth (In.) | 18.22 in |
| Motor RPM | 1,725 RPM |
| CFM @ 0.750-In. SP | 500 |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Shaft Dia. (In.) | 14 mm |
| Includes | Motor Mounting Base |
| Wheel Type | Forward-Curved |
| Housing Material | Plastic |
| CFM @ 1.000-In. SP | 500 |
| Width (In.) | 15.25 in |
| Phase | 1 |
| CFM @ 0.500-In. SP | 500 |
| Drive Type | Direct Drive |
| Motor Enclosure Design | Totally Enclosed Fan-Cooled (TEFC) |
| Overall Width | 15 1/4 in |
| Overall Depth | 18 3/16 in |
| Outlet Shape | Round |
| Airflow @ 1.250 in SP | 500 cfm |
| Wheel Diameter | 7 7/8 in |
| Number of Inlets | 1 |
| Airflow @ 0.750 in SP | 500 cfm |
| Shaft Diameter | 14 mm |
| Flange Type | Non-Flanged |
| Outlet Height | Not Applicable |
| Wheel Width | 4 1/8 in |
| Outlet Width | Not Applicable |
| Housing Height | 24 3/4 in |
| Number of Discharge Positions | 2 |
| Standards | AMCA Air Performance Certified, CSA Certified, UL Listed |
| For Fan Speed (Dependent on Motor) | 1,725 RPM to 1,725 RPM |
| Includes Mounting Hardware | Yes |
| Outlet Diameter | 6 9/16 in |
| Sound Level | 56 dBA @ 5 ft |
| Inlet Type | Single-Inlet |
| Material | Plastic Wheel u0026 Plastic Housing |
| Nominal Voltage | 115/230V AC |
| Discharge Position | Bottom Horizontal, Down Blast, Top Horizontal, Up Blast |
| Includes Motor | Yes |
| Maximum Fan Speed | 1,725 RPM |
| Maximum Ambient Temperature | -13 Degrees F |
| Housing Width | 15 1/4 in |
| Flange Size | Not Applicable |
| Airflow @ Static Pressures | 500 cfm @ 1.000 in SP |
| Mount Type | Motor Mount |
| Mounting Orientation | Multiposition |
| Wheel Dimensions | 7 7/8 in Dia. x 4 1/8 in W |
| Minimum Fan Speed | 1,725 RPM |
| Frequency | 60 Hz |
| Minimum Ambient Temperature | -40 Degrees F |
| Flange Type_broad | Outlet |
| Airflow @ 0.500 in SP Range | 0 to 999 cfm |
| Includes Drive Package | Yes |
| Airflow @ 1.000 in SP | 500 cfm |
| Thermal Overload Protection | Yes |
| Motor Enclosure Design_Table | Totally Enclosed Motor |
| Maximum Static Pressure | 1 3/8 in wc |
| Maximum Inlet Air Temperature | 140 Degrees F |
| Outlet Size | 6 1/2 in diameter |
| Motor Horsepower | 1/3 hp |
| Assembly | Assembled |
| Corrosion Resistant | Yes |
| Overall Height | 24 3/4 in |
| Motor Speed | 1,725 RPM |
| Airflow @ 0.500 in SP | 500 cfm |
| Motor Frame Designation | 71 |
| Inlet Diameter | 6 1/4 in |
| Current | 4.04/2.02 A |
| For Air Type | Contaminated, Damp, Dirty and Dusty, Emergency Smoke Control, Clean Air, High Temperature |
| Outlet Shape_broad | Round |
| Nameplate Voltage | 115/230V AC |
| OEM Replacement | No |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Plastec Blower, Forward Curve, 7 7/8 in, Plastec, Mfr#: P20SS4P033
$1675,99
Free shipping will be applied on orders over $50
Plastec Blower, Wheel Type Forward-Curved, Drive Type Direct Drive, Includes Drive Package Yes, Assembly Assembled, Wheel Diameter 7 7/8 in, Airflow @ 0.500 in SP 500 cfm, Airflow @ 0.750 in SP 500 cfm, Airflow @ 1.000 in SP 500 cfm, Airflow @ 1.250 in SP 500 cfm
9999 in stock
Must order in multiples of 1
Subtotal:
$1675.99
You must be logged in to post a review.
Reviews
There are no reviews yet.