| Property | Value |
|---|---|
| Item | Plastec Blower |
| Type | Direct Drive Forward Curve |
| Wheel Dia. (In.) | 14.625 in |
| Voltage | 230/460 |
| Motor HP | 2 hp |
| Motor Type | General Duty, Three Phase |
| Motor RPM | 850 RPM |
| Outlet Dia. (In.) | 12.4 in |
| Bearing Type | Sealed, Permanently Lubricated Ball |
| Wheel Material | Plastic |
| Includes | Motor Mounting Base |
| Depth (In.) | 28.02 in |
| Max. Ambient Temp. (F) | -13 Degrees F |
| Housing Finish | Polypropylene |
| Max. Inlet Temp. (Deg. F) | 140 Degrees F |
| dBA @ 5 Feet | 64 dBA |
| Wheel Type | Forward-Curved |
| Wheel Width (In.) | 7 in |
| Housing Material | Plastic |
| Phase | 3 |
| Inlet Dia. (In.) | 12.4 in |
| Height (In.) | 46.1 in |
| Rotation | CCW |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Full Load Amps | 7.23/3.61 |
| Shaft Dia. (In.) | 28 mm |
| CFM @ 1.000-In. SP | 2300 |
| CFM @ 1.500-In. SP | 0 |
| Motor Frame | 112 |
| Width (In.) | 29.51 in |
| Blower RPM | 850 RPM |
| CFM @ 1.250-In. SP | 1600 |
| Hz | 50/60 Hz |
| Agency Compliance | AMCA and CSA certified, UL Listed |
| Includes Motor | Yes |
| Drive Type | Direct Drive |
| Includes Drive Package | Yes |
| Mount Type | Motor Mount |
| Motor Speed | 850 RPM |
| Housing Width | 29 1/2 in |
| Maximum Ambient Temperature | -13 Degrees F |
| Discharge Position | Bottom Horizontal, Down Blast, Top Horizontal, Up Blast |
| Thermal Overload Protection | Yes |
| Motor Frame Designation | 112 |
| Minimum Fan Speed | 850 RPM |
| Wheel Width | 7 in |
| Maximum Static Pressure | 1 3/8 in wc |
| Flange Type | Non-Flanged |
| Standards | AMCA Air Performance Certified, CSA Certified, UL Listed |
| Minimum Ambient Temperature | -40 Degrees F |
| Current | 7.23/3.61 A |
| Maximum Inlet Air Temperature | 140 Degrees F |
| Overall Depth | 28 in |
| Wheel Diameter | 14 5/8 in |
| Includes Mounting Hardware | Yes |
| Outlet Height | Not Applicable |
| Shaft Diameter | 28 mm |
| Frequency | 50/60 Hz |
| Airflow @ 1.000 in SP | 2,300 cfm |
| Maximum Fan Speed | 850 RPM |
| Mounting Orientation | Multiposition |
| Airflow @ 1.250 in SP | 1,600 cfm |
| Corrosion Resistant | Yes |
| Number of Discharge Positions | 2 |
| Inlet Diameter | 12 3/8 in |
| For Air Type | Contaminated, Damp, Dirty and Dusty, Emergency Smoke Control, Clean Air, High Temperature |
| Nameplate Voltage | 230/460V AC |
| Assembly | Assembled |
| Outlet Diameter | 12 3/8 in |
| Housing Height | 46 1/16 in |
| Number of Inlets | 1 |
| Outlet Shape | Round |
| Outlet Width | Not Applicable |
| Overall Height | 46 1/16 in |
| Flange Size | Not Applicable |
| Motor Horsepower | 2 hp |
| Sound Level | 64 dBA @ 5 ft |
| Overall Width | 29 1/2 in |
| OEM Replacement | No |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Plastec Blower, Forward Curve, 14 5/8 in, Plastec, Mfr#: P35ST8P200
$5938,99
Free shipping will be applied on orders over $50
Plastec Blower, Wheel Type Forward-Curved, Drive Type Direct Drive, Includes Drive Package Yes, Assembly Assembled, Wheel Diameter 14 5/8 in, Airflow @ 1.000 in SP 2,300 cfm, Airflow @ 1.250 in SP 1,600 cfm
9999 in stock
Must order in multiples of 1
Subtotal:
$5938.99
You must be logged in to post a review.
Reviews
There are no reviews yet.