| Property | Value |
|---|---|
| Item | Plastec Blower |
| Type | Direct Drive Forward Curve |
| Wheel Dia. (In.) | 14.625 in |
| Voltage | 230/460 |
| Motor HP | 10 hp |
| Motor Type | General Duty, Three Phase |
| Max. Inlet Temp. (Deg. F) | 140 Degrees F |
| Width (In.) | 29.51 in |
| Includes | Motor Mounting Base |
| Housing Material | Plastic |
| Motor Frame | 132 |
| Wheel Width (In.) | 7 in |
| CFM @ 3.000-In. SP | 2000 |
| Full Load Amps | 24.7/12.35 |
| Bearing Type | Sealed, Permanently Lubricated Ball |
| Hz | 50/60 Hz |
| Height (In.) | 46.1 in |
| Max. Ambient Temp. (F) | -13 Degrees F |
| Housing Finish | Polypropylene |
| Shaft Dia. (In.) | 28 mm |
| CFM @ 1.500-In. SP | 800 |
| CFM @ 2.000-In. SP | 1500 |
| dBA @ 5 Feet | 82 dBA |
| Motor RPM | 1,725 RPM |
| Rotation | CCW |
| Depth (In.) | 31.54 in |
| Wheel Type | Forward-Curved |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Blower RPM | 1,725 RPM |
| Agency Compliance | AMCA and CSA certified, UL Listed |
| Wheel Material | Plastic |
| Inlet Dia. (In.) | 12.4 in |
| Outlet Dia. (In.) | 12.4 in |
| Phase | 3 |
| CFM @ 2.500-In. SP | 2000 |
| Includes Mounting Hardware | Yes |
| Motor Speed | 1,725 RPM |
| Airflow @ 2.000 in SP | 1,500 cfm |
| Outlet Shape | Round |
| Motor Horsepower | 10 hp |
| Assembly | Assembled |
| Overall Height | 46 1/16 in |
| Flange Type | Non-Flanged |
| Current | 24.7/12.35 A |
| Mount Type | Motor Mount |
| Maximum Fan Speed | 1,725 RPM |
| Flange Size | Not Applicable |
| Includes Drive Package | Yes |
| Thermal Overload Protection | Yes |
| Corrosion Resistant | Yes |
| Number of Discharge Positions | 2 |
| Standards | AMCA Air Performance Certified, CSA Certified, UL Listed |
| Overall Depth | 31 1/2 in |
| Maximum Ambient Temperature | -13 Degrees F |
| Minimum Fan Speed | 1,725 RPM |
| Maximum Inlet Air Temperature | 140 Degrees F |
| For Air Type | Contaminated, Damp, Dirty and Dusty, Emergency Smoke Control, Clean Air, High Temperature |
| Outlet Diameter | 12 3/8 in |
| Number of Inlets | 1 |
| Sound Level | 82 dBA @ 5 ft |
| Housing Height | 46 1/16 in |
| Maximum Static Pressure | 5 3/4 in wc |
| Shaft Diameter | 28 mm |
| Overall Width | 29 1/2 in |
| Inlet Diameter | 12 3/8 in |
| Wheel Width | 7 in |
| Wheel Diameter | 14 5/8 in |
| Airflow @ 2.500 in SP | 2,000 cfm |
| Drive Type | Direct Drive |
| Nameplate Voltage | 230/460V AC |
| Outlet Height | Not Applicable |
| Motor Frame Designation | 132 |
| Housing Width | 29 1/2 in |
| Mounting Orientation | Multiposition |
| Minimum Ambient Temperature | -40 Degrees F |
| Airflow @ 1.500 in SP | 800 cfm |
| Includes Motor | Yes |
| Airflow @ 3.000 in SP | 2,000 cfm |
| Discharge Position | Bottom Horizontal, Down Blast, Top Horizontal, Up Blast |
| Outlet Width | Not Applicable |
| Frequency | 50/60 Hz |
| OEM Replacement | No |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Plastec Blower, Forward Curve, 14 5/8 in, Plastec, Mfr#: P35ST4P1000
$5835,99
Free shipping will be applied on orders over $50
Plastec Blower, Wheel Type Forward-Curved, Drive Type Direct Drive, Includes Drive Package Yes, Assembly Assembled, Wheel Diameter 14 5/8 in, Airflow @ 1.500 in SP 800 cfm, Airflow @ 2.000 in SP 1,500 cfm, Airflow @ 2.500 in SP 2,000 cfm, Airflow @ 3.000 in SP 2,000 cfm
9999 in stock
Must order in multiples of 1
Subtotal:
$5835.99
You must be logged in to post a review.
Reviews
There are no reviews yet.