| Property | Value |
|---|---|
| Bore Dia. | 2 in |
| Temp. Range | -40 Degrees to 250 Degrees F |
| Dynamic Load Capacity | 19,000 lb |
| Static Load Capacity | 22,500 lb |
| Includes | Expansion M2000 Spherical Roller Bearing |
| Item | Pillow Block Bearing |
| Bearing Insert Type | Spherical Roller |
| Dimension G | 1 in |
| Bearing Housing Material Type | Cast Iron |
| Dimension H | 1 3/8 in |
| Bearing Lubrication | Lithium Complex Grease |
| Shaft Locking Type | Set Screws |
| Overall Length | 8.375 in |
| Bolt Hole Center-to-Center | 6 9/16 in |
| Dimension M | 2 1/4 in |
| Mounting Surface to Shaft Center | 2 1/4 in |
| Dimension L | 2 7/8 in |
| Number of Bolts | 2 |
| Overall Height | 4.562 in |
| Dimension A | 3 in |
| Dimension J | 4 9/16 in |
| Dimension C | 2 3/16 in |
| Dimension B | 8 3/8 in |
| Dimension F | 5/8 in |
| Dimension N | 2 7/8 in |
| Overall Width | 3 in |
| Dimension D | 5 15/16 in |
| Bolt Size | 5/8 in |
| Bearing Insert Material | Alloy Steel |
| Max. Speed | 2,400 RPM |
| Housing Material | Cast Iron |
| Maximum Speed | 2,400 RPM |
| Maximum Temperature | 250 Degrees F |
| Features | +/-11/2 Degrees Misalignment Capacity, Assembled, Adjusted and Pre-Lubricated in Advance for Immediate Use, Built with Skf(TM) and Timken(TM) Spherical Roller Bearings, Expansion Units have .100 in Capacity, Piloted Flange Housings are Machined with Back-Out Holes, Precision Ground Contours, Rotating Center Guide Ring for Least Possible Friction, Single Piece Outer Race is Grooved and has 3 Lube Holes for Even Distribution of Grease), Standard Units have One Locking Collar, Timken(TM) Lithium Complex Grease Operating Temperature is up to 250 Degrees , High Temperature Grease is Available up to 350 Degrees , will Accommodate Moderate Thrust Loads and Permits Angular Misalignment without Loss of Capacity |
| Included Bearing | Expansion M2000 Spherical Roller |
| Base Height | 1.38 in |
| Load Direction | Thrust |
| Bearing Material Grade | 52100 |
| Expansion Type | Expansion |
| Static Radial Load Capacity | 22,500 lbf |
| Dynamic Axial Load Capacity | 19,000 lbf |
| Seal Type | Contact |
| Mount Hole Center-to-Center Length | 6.25 in |
| Number of Mount Holes | 2 |
| Mount Hole Size | 1 in |
| Bore Diameter | 2 in |
| Center Height | 2.25 in |
| Minimum Temperature | -40 Degrees F |
| Application | Air Handling, Conveying, Food Processing, Paper and Forestry, Screening |
| Mount Type | Bolt-Through |
| Lubricant Material | Lithium Grease |
| Mounting Bolt Size | 5/8 in |
| Base Width | 2.19 in |
| System of Measurement | Inch |
| Maximum Misalignment Angle | 5.5 Degrees |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Pillow Block Bearing, 2 in Bore, Cast Iron, Moline Bearing, Mfr#: 19121200
$358,99
Free shipping will be applied on orders over $50
Pillow Block Bearing, Base Height 1.38 in, Base Width 2.19 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Spherical Roller, Bore Diameter 2 in, Center Height 2.25 in, Expansion Type Expansion, Housing Material Cast Iron, Included Bearing Expansion M2000 Spherical Roller, Lubricant Material Lithium Grease, Maximum Speed 2,400 RPM, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Mount Hole Center-to-Center Length 6.25 in, Mount Type Bolt-Through
9999 in stock
Must order in multiples of 1
Subtotal:
$358.99
You must be logged in to post a review.
Reviews
There are no reviews yet.