| Property | Value |
|---|---|
| Item | Lathe |
| Compound Travel (In.) | 5-1/8 |
| Spindle Bore (In.) | 3-1/8 |
| Motor HP | 7-1/2 |
| Features | 3-1/8 in Bore Spindle is Supported by Two Tapered Bearings and One Ball Bearing of Chrome Molybdenum, Headstock Gears are Hardened, Ground and Shaved, Universal Gearbox Allows Inch, Metric, Diametral and Module Pitch Threads, No Change Gears Required, Carriage Features One-Shot Lubrication and Turcite-B on Bed Sliding Surfaces, T-Slotted Compound Slide Featuring Four-Way Tool Post, One Piece Cast Iron Base Absorbs Vibration Allowing Heavier Cuts, High Quality ANSIi Class 50 Wear Resistant Cast Iron Bed Ways are Removable, Gap Allows Large Diameter Work, Five Position Automatic Carriage Stop Increases Productivity, Meehanite Castings |
| Overall Length | 97 in |
| Thread Range (In.) | 1-5/8 to 72 |
| Cross Feed Rates | 122 |
| Swing Over Cross Slide (In.) | 10 |
| Number of Threads (In.) | 61 |
| Swing Over Bed (In.) | 16 |
| Overall Width | 45 in |
| Swing In Gap (In.) | 25-7/8 |
| Spindle Taper | MT-7 |
| Thread Range (mm) | .05 to 20 |
| Number of Spindle Speeds | 12 |
| Carriage Travel (In.) | 35 |
| Distance Between Centers (In.) | 40 |
| Phase | Three |
| Longitudinal Feed Rates | 122 |
| Spindle Speed (RPM) | 25 to 1800 |
| Includes | (5) 12 in Faceplates, 10 in 3 Jaw Scroll Chuck with Top Reversing Jaws, Acu-Rite 300S DRO, Articulating LED Work Lamp, Centrally Located Controls with Jog Button, E-Stop on Carriage, Electronic Chuck Key Holder, Fitted Top Mats to Hold Tooling, Follow Rest, Foot Brake, Full Length Splash Guard and Coolant Return, Fully Integrated Coolant System, Large Capacity Steady Rest with Ball Bearing Tips, Live Center, Mounting Pads and Levelers, Quick Change Tool Post Set, Threading Dial, Tolerance Test Certificate, Tool Box and Adjusting Tools |
| Cross Travel (In.) | 9 |
| Number of Threads (mm) | 24 |
| Voltage | 230V AC |
| Tailstock Taper | MT3 |
| Gap Length (In.) | 12 |
| Tailstock Travel (In.) | 5 |
| Overall Height | 97 in |
| Application | Turning |
| Swing Over Cross Slide | 10 in |
| Max. Metric Thread | 20 mm |
| Number of Metric Threads | 24 |
| Spindle Bore | 3 1/8 in |
| Horsepower | 7 1/2 hp |
| Distance Between Centers | 40 in |
| Max. Cross Feed | 0.0360 in |
| Swing In Gap | 25 7/8 in |
| Min. Metric Thread | 0.05 mm |
| Min. Threads per Inch | 1 5/8 |
| Min. Cross Feed | 0.0006 in |
| Max. Spindle Speed | 1,800 RPM |
| Bed Width | 8 in |
| Max. Threads per Inch | 72 |
| Gap Length | 12 in |
| Min. Spindle Speed | 25 RPM |
| Spindle Nose Type | D1-4 Camlock |
| Swing Over Bed | 16 in |
| Number of Inch Threads | 61 |
| Frequency | 60 Hz |
| Sound Level | 88 dB |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Large Spindle Bore Lathe, 7-1/2HP, 3P, Jet, Mfr#: 321930
$27449,00
Free shipping will be applied on orders over $50
Lathe, Distance Between Centers 40 in, Voltage 230V AC, Horsepower 7 1/2 hp, Min. Spindle Speed 25 RPM, Application Turning, Overall Height 97 in, Overall Length 97 in, Overall Width 45 in, Max. Spindle Speed 1,800 RPM, Tailstock Taper MT3, Spindle Nose Type D1-4 Camlock
9999 in stock
Must order in multiples of 1
Subtotal:
$27449
You must be logged in to post a review.
Reviews
There are no reviews yet.