| Property | Value |
|---|---|
| Action Type | Lever |
| Suction Tube Length | 46 in |
| For Media Type | Acetic Acid, Ammonium Hydroxide, Antifreeze, Bleach, Citric Acid, DEF, Ethanol, Ethylene Glycol, Formaldehyde, Glycerin, Isopropanol, Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfite, Water |
| For Container Size | 55 gal, 275 gal, 330 gal |
| Max. Flow Rate | 10 oz per stroke |
| Max. Viscosity | 10 cps |
| Wetted Materials | Polypropylene, Viton |
| Food Grade | No |
| Discharge Tube Outlet ID | 3/4 in |
| Max. Fluid Temp. | 150 Degrees F |
| Includes | Hose, Nozzle, RPV Coupler, RPV Valve, Suction Tube |
| Metered | No |
| Discharge Tube Outlet OD | 1 in |
| Runs Dry | Yes |
| Includes Suction Tube | Yes |
| Diesel Exhaust Fluid Compatible | Yes |
| Max. Temp. | 150 Degrees F |
| Application | Trucking, Farming, Agriculture, Construction, Marine, Industrial, Automotive |
| Transfer Pump Application | Agriculture, Automotive, Construction, Farming, Industrial, Marine, Trucking |
| Max. Specific Gravity | 1.09 |
| Self-Priming | Yes |
| Inlet Size | 1 |
| Overall Height | 28 |
| Max. Liquid Temp. | 150 Degrees F |
| Discharge Tube Length | 144 |
| Suction Tube Type | 1-Piece Tube |
| Outlet Size | 3/4 |
| Max. Pressure | 23 psi |
| Adapter Type | RPV |
| Agency Compliance | ISO 22241-3 |
| Shaft Material | Polypropylene |
| Ounces per Stroke | 10 oz. |
| Gasket Material | EPDM |
| Seal Type | O-ring |
| Nozzle Material | Polypropylene, Stainless Steel |
| Item | Hand Operated Drum Pump |
| Adapter Material | Polypropylene |
| Inlet | 1 |
| Suction Lift | 6 ft. |
| Hose Material | Peroxide Cured EPDM |
| Housing Material | Polypropylene |
| Features | Dispenses 1 gal Per 12 Strokes |
| Pump Body Material | Polypropylene |
| Manufacturers Warranty Length | 90 days |
| Pump Design | Piston |
| Seal Material | Viton |
| Piston Material | Polypropylene |
| Overall Width | 12 |
| Hose Length | 12 ft |
| For Use With | 195205B/ N48GP48 |
| Hose Dia. | 3/4 |
| Max. Head | 3 ft. |
| pH Range | 5.0 to 10 |
| Nozzle Type | Manual |
| Hose Inside Dia. | 3/4 in |
| Nozzle Operation | Manual |
| Includes Nozzle | Yes |
| Power Source | Hand Operated |
| Includes Discharge Hose | Yes |
| Max. Head - Pumps | 3 ft |
| Hose Tube Material | EPDM |
| Hose Outside Dia. | 1 in |
| Height Above Container | 19 in |
| Includes Spout | Yes |
| Min. Operating Temp. | 17 Degrees F |
| Max. Head Pressure | 10 psi |
| Duty Cycle | Continuous |
| Not Recommended Chemicals | Acetic Acid (Glacial), Acetic Acid 80%, Acetone, Ammonia (Liquids), Anhydrous Ammonia, Automatic Transmission Fluid, Biodiesel, Brake Fluid, Calcium Chloride, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 5%, Chromic Acid 50%, Cyclohexane, Diesel Fuel, E85, Ethyl Acetate, Fertilizers, Formic Acid, Fungicides, Gasoline, Heptane, Herbicides, Hexane, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Hydrazine, Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Kerosene, Lacquer Thinners, Lithium Grease, Methyl (Methanol), Methyl Chloride, Methyl Ethyl Ketone (MEK), Motor Oil, Naphtha, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Paint, Paint Thinner, Pesticides, Phosphoric Acid (40% Solution), Sodium Bisulfate, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Stoddard Solvent (Mineral Spirits), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Sulfuric Acid (to 10%), Toluene, Trichlorethylene (50%), Turpentine, Windshield Washer Fluid, Xylene |
| Max. Oil Flow | 10.6 oz per stroke |
| Includes Bung Adapter | Yes |
| Compatible Chemicals | Acetic Acid 20%, Ammonium Hydroxide, Antifreeze (Coolant), Citric Acid 50%, DEF, Deionized Water, Ethyl (Ethanol), Ethylene Glycol, Formaldehyde, Formaldehyde 40%, Fresh Water, Glycerin, Isopropyl (Isopropanol), Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfite, Sodium Hypochlorite/Bleach (to 20%) |
| For Container Type | Drum, Tote |
| Housing Material - Pumps | Polypropylene |
| Pump Connection ID | 1 in |
| Hose Cover Material | EPDM |
| Spout Material | 316 Stainless Steel |
| Discharge Connection Type | Hose Barb |
| Bung Connection Dia. | 2-1/2 in x 5 in |
| Spout Length | 3 1/2 in |
| Grease | NT |
| Adapter Connection Type | Buttress |
| Max. Outlet Pressure | 10 psi |
| Gear Lube | NT |
| Country of Origin (subject to change) | United Kingdom |
| Package Quantity | 1 |
Hand Drum Pump, Suction Tube 46" L, Liquidynamics, Mfr#: 560008V-S3M-330
$556,42
Free shipping will be applied on orders over $50
Hand Operated Drum Pump, Max. Outlet Pressure 10 psi, Self-Priming Yes, Metered No, Hose Length 12 ft, Includes Discharge Hose Yes, Piston Material Polypropylene, Features Dispenses 1 gal Per 12 Strokes, Seal Material Viton, For Use With 195205B/ N48GP48, Adapter Connection Type Buttress, Discharge Connection Type Hose Barb, For Container Type Drum, Tote, Hose Cover Material EPDM, Includes Bung Adapter Yes, Includes Nozzle Yes, Includes Spout Yes, Runs Dry Yes, Nozzle Operation Manual
9999 in stock
Must order in multiples of 1
Subtotal:
$556.42
You must be logged in to post a review.
Reviews
There are no reviews yet.