| Property | Value |
|---|---|
| Solids Handling Capacity | 1-1/8 |
| Temp. Range | 35 Degrees to 105 Degrees F |
| Application | Trash |
| Volute/Wear Plate | Cast Iron/Stainless Steel |
| Height | 24 |
| Includes | 1ZNC4 - 4 in Hose Kit |
| Mechanical Seal | Silicon Carbide, Buna N |
| Tank Capacity | 1.73 gal |
| Max. Pressure | 35 psi |
| Casing Adapter | Aluminum |
| Impeller Type | Semi-Open |
| Engine RPM | 3600 |
| Material of Construction | Aluminum |
| Seal Material | Buna N, Silicon Carbide |
| Check Valve | Buna N |
| Number of Impellers | 1 |
| GPM of Water @ 40 Ft. of Head | 290 |
| Outlet | 4 |
| Length | 28-3/4 |
| Impeller Material | Cast Iron |
| GPM of Water @ 20 Ft. of Head | 410 |
| Engine Brand | Honda OHV |
| Inlet | 4 in NPSM |
| GPM of Water @ 50 Ft. of Head | 220 |
| Engine Size | 337 cc |
| GPM of Water @ 70 Ft. of Head | 75 |
| GPM of Water @ 30 Ft. of Head | 360 |
| Max. Suction Lift | 25 ft |
| Sensor Type | Low Oil |
| Engine/Motor Type | Gas |
| HP | 9 1/2 hp |
| GPM of Water @ 10 Ft. of Head | 430 |
| Width | 19 |
| Ignition Type | Electronic |
| Item | Engine Driven Utility Pump |
| Roll Bar Frame | Steel |
| Agency Compliance | EPA and CARB Certified Engine |
| GPM of Water @ 60 Ft. of Head | 150 |
| Max. Head | 80 ft |
| Inlet Standard | NPSM |
| Volute Material | Cast Iron/Stainless Steel |
| Discharge Dia. | 4 in |
| Body Material | Aluminum |
| RPM | 3,600 RPM |
| Overall Height | 24 in |
| Pump Mechanism | Centrifugal |
| Flow Rate @ 10 Ft. of Head | 430 gpm |
| Impeller Design | Semi-Open |
| Flow Rate @ 40 Ft. of Head | 290 gpm |
| Frame Design | Full-Frame |
| Discharge | 4 in NPSM |
| Discharge Standard | NPSM |
| Flow Rate @ 60 Ft. of Head | 150 gpm |
| Frame Material | Steel |
| Power Source | Gas |
| Overall Width | 19 in |
| Inlet Dia. | 4 in |
| Flow Rate @ 20 Ft. of Head | 410 gpm |
| Overall Length | 28 3/4 in |
| Max. Diameter Solids | 1 1/8 in |
| Maximum Discharge Pressure | 35 psi |
| Frame Design - Pumps | Full Tubular Frame |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Engine Drive Pump Kit, 11 HP, Honda Engine, Dayton, Mfr#: 7AJ13
$3913,99
Free shipping will be applied on orders over $50
Engine Driven Utility Pump, Engine Size 337 cc, HP 9 1/2 hp, Tank Capacity 1.73 gal, Ignition Type Electronic, Pump Mechanism Centrifugal, Body Material Aluminum, Volute Material Cast Iron/Stainless Steel, Seal Material Buna N, Silicon Carbide, Frame Material Steel, Flow Rate @ 10 Ft. of Head 430 gpm, Flow Rate @ 20 Ft. of Head 410 gpm, Flow Rate @ 40 Ft. of Head 290 gpm, Flow Rate @ 60 Ft. of Head 150 gpm, Max. Head 80 ft, Max. Suction Lift 25 ft, Frame Design - Pumps Full Tubular Frame
9999 in stock
Must order in multiples of 1
Subtotal:
$3913.99
You must be logged in to post a review.
Reviews
There are no reviews yet.