| Property | Value |
|---|---|
| GPM of Water @ 30 Ft. of Head | 280 |
| Check Valve | Buna N |
| GPM of Water @ 10 Ft. of Head | 320 |
| Impeller Material | Cast Iron |
| GPM of Water @ 70 Ft. of Head | 125 |
| Seal Material | Buna N, Silicon Carbide |
| GPM of Water @ 40 Ft. of Head | 250 |
| GPM of Water @ 60 Ft. of Head | 170 |
| Item | Engine Driven Utility Pump |
| Impeller Type | Semi-Open |
| Material of Construction | Aluminum |
| Height | 24 |
| Tank Capacity | 5.6 qt |
| Agency Compliance | EPA and CARB Certified Engine |
| HP | 7 1/10 hp |
| Outlet | 3 |
| Includes | 1ZNC3 - 3 in Hose Kit |
| Engine Brand | Honda GX240 OHV |
| Width | 19 |
| Number of Impellers | 1 |
| Temp. Range | 35 Degrees to 105 Degrees F |
| GPM of Water @ 50 Ft. of Head | 225 |
| Roll Bar Frame | Steel |
| Max. Head | 89 ft |
| Application | Trash |
| Length | 26-1/2 |
| GPM of Water @ 20 Ft. of Head | 305 |
| Mechanical Seal | Silicon Carbide, Buna N |
| Max. Pressure | 39 psi |
| Engine RPM | 3600 |
| Max. Suction Lift | 26 ft |
| GPM of Water @ 80 Ft. of Head | 68 |
| Volute/Wear Plate | Cast Iron |
| Engine Size | 242 cc |
| Inlet | 3 in NPT |
| Solids Handling Capacity | 1-1/8 |
| Engine/Motor Type | Gas |
| Casing Adapter | Aluminum |
| Ignition Type | Recoil-Start |
| Sensor Type | Low Oil |
| Pump Mechanism | Centrifugal |
| Impeller Design | Semi-Open |
| Maximum Discharge Pressure | 39 psi |
| Max. Diameter Solids | 1 1/2 in |
| Discharge | 3 in NPT |
| Discharge Dia. | 3 in |
| Inlet Standard | NPSM |
| Flow Rate @ 20 Ft. of Head | 324 gpm |
| RPM | 3,600 RPM |
| Overall Width | 20 5/16 in |
| Flow Rate @ 10 Ft. of Head | 335 gpm |
| Flow Rate @ 80 Ft. of Head | 68.0 gpm |
| Flow Rate @ 60 Ft. of Head | 224 gpm |
| Overall Length | 28 13/32 in |
| Volute Material | Spheroid Graphite Ductile Iron |
| Frame Material | Steel |
| Overall Height | 23 7/64 in |
| Flow Rate @ 40 Ft. of Head | 278 gpm |
| Discharge Standard | NPSM |
| Inlet Dia. | 3 in |
| Power Source | Gas |
| Body Material | Aluminum |
| Frame Design | Full-Frame |
| Frame Design - Pumps | Full Tubular Frame |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Engine Drive Pump Kit, 8 HP, Honda Engine, Dayton, Mfr#: 7AJ12
$2139,99
Free shipping will be applied on orders over $50
Engine Driven Utility Pump, Engine Size 242 cc, HP 7 1/10 hp, Tank Capacity 5.6 qt, Ignition Type Recoil-Start, Pump Mechanism Centrifugal, Body Material Aluminum, Volute Material Spheroid Graphite Ductile Iron, Seal Material Buna N, Silicon Carbide, Frame Material Steel, Flow Rate @ 10 Ft. of Head 335 gpm, Flow Rate @ 20 Ft. of Head 324 gpm, Flow Rate @ 40 Ft. of Head 278 gpm, Flow Rate @ 60 Ft. of Head 224 gpm, Max. Head 89 ft, Max. Suction Lift 26 ft, Frame Design - Pumps Full Tubular Frame
9999 in stock
Must order in multiples of 1
Subtotal:
$2139.99
You must be logged in to post a review.
Reviews
There are no reviews yet.