| Property | Value |
|---|---|
| Outlet | 3 |
| Engine RPM | 3600 |
| Sensor Type | Low Oil |
| Seal Material | Buna N, Silicon Carbide |
| HP | 7 1/10 hp |
| GPM of Water @ 20 Ft. of Head | 324 |
| Impeller Type | Semi-Open |
| Application | Trash |
| Engine/Motor Type | Gas |
| Temp. Range | 35 Degrees to 105 Degrees F |
| Max. Suction Lift | 26 ft |
| Ignition Type | Recoil-Start |
| GPM of Water @ 70 Ft. of Head | 176 |
| Length | 28-13/32 |
| Max. Head | 89 ft |
| Inlet | 3 in NPT |
| GPM of Water @ 60 Ft. of Head | 224 |
| Casing Adapter | High Chrome |
| Mechanical Seal | Silicon Carbide, Buna N |
| Volute/Wear Plate | Cast Iron |
| GPM of Water @ 10 Ft. of Head | 335 |
| Material of Construction | Aluminum |
| GPM of Water @ 40 Ft. of Head | 278 |
| Check Valve | Buna N |
| Roll Bar Frame | Steel |
| Agency Compliance | EPA and CARB Certified Engine |
| Number of Impellers | 1 |
| Max. Pressure | 38.5 psi |
| Solids Handling Capacity | 1-1/4 |
| Impeller Material | High Chrome |
| GPM of Water @ 30 Ft. of Head | 306 |
| Height | 23-7/64 |
| GPM of Water @ 50 Ft. of Head | 253 |
| Item | Engine Driven Utility Pump |
| Width | 20-5/16 |
| Engine Brand | Honda GX240 OHV |
| Tank Capacity | 5.6 qt |
| Includes | 11G238 - 7.1 hp Engine Trash Pump, (2) 1MJT1 - Male x FNPT Polypropylene Adapter, 1ZMW7 - 3 in x 20 ft Suction and Discharge Hose, (2) 45DT97 - 3 in x 50 ft Water Discharge Hose, 1P931 - Suction Strainer |
| Engine Size | 242 cc |
| Flow Rate @ 60 Ft. of Head | 224.0 gpm |
| Power Source | Gas |
| Impeller Design | Semi-Open |
| Maximum Discharge Pressure | 39 psi |
| Volute Material | Spheroid Graphite Ductile Iron |
| Flow Rate @ 40 Ft. of Head | 278.0 gpm |
| Max. Diameter Solids | 1 1/2 in |
| Frame Design | Full-Frame |
| Overall Width | 20 5/16 in |
| Flow Rate @ 20 Ft. of Head | 324.0 gpm |
| RPM | 3,600 RPM |
| Body Material | Aluminum |
| Inlet Dia. | 3 in |
| Discharge Standard | NPT |
| Overall Length | 28 13/32 in |
| Overall Height | 23 7/64 in |
| Frame Material | Steel |
| Flow Rate @ 10 Ft. of Head | 335.0 gpm |
| Inlet Standard | NPT |
| Discharge Dia. | 3 in |
| Pump Mechanism | Centrifugal |
| Discharge | 3 in NPT |
| Frame Design - Pumps | Full Tubular Frame |
| Flow Rate @ 80 Ft. of Head | 68 gpm |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Engine Drive Pump Kit, 7.1HP, Honda Engine, Dayton, Mfr#: 7AJ21
$2316,99
Free shipping will be applied on orders over $50
Engine Driven Utility Pump, Engine Size 242 cc, HP 7 1/10 hp, Tank Capacity 5.6 qt, Ignition Type Recoil-Start, Pump Mechanism Centrifugal, Body Material Aluminum, Volute Material Spheroid Graphite Ductile Iron, Seal Material Buna N, Silicon Carbide, Frame Material Steel, Flow Rate @ 80 Ft. of Head 68 gpm, Max. Head 89 ft, Max. Suction Lift 26 ft, Frame Design - Pumps Full Tubular Frame, Impeller Design Semi-Open, Maximum Discharge Pressure 39 psi, Max. Diameter Solids 1 1/2 in, Inlet 3 in NPT
9999 in stock
Must order in multiples of 1
Subtotal:
$2316.99
You must be logged in to post a review.
Reviews
There are no reviews yet.