| Property | Value |
|---|---|
| Max. Pressure | 39 psi |
| Width | 20 |
| Self-Priming | Yes |
| Temp. Range | 33 Degrees to 104 Degrees F |
| GPM of Water @ 90 Ft. of Head | 20 |
| Item | Engine Driven Utility Pump |
| GPM of Water @ 80 Ft. of Head | 75 |
| Inlet | 3 in MNPT |
| Engine/Motor Type | Gas |
| GPM of Water @ 10 Ft. of Head | 350 |
| Seal Material | Silicon Carbide |
| Solids Handling Capacity | 1-1/2 |
| Max. Suction Lift | 26 ft |
| Engine Brand | Honda |
| Length | 27-1/2 |
| GPM of Water @ 60 Ft. of Head | 180 |
| Impeller Type | Semi Open |
| Casing Adapter | Aluminum |
| HP | 8 hp |
| Ignition Type | Recoil-Start |
| Agency Compliance | EPA/CARB |
| GPM of Water @ 20 Ft. of Head | 320 |
| Impeller Material | Chrome Iron |
| Height | 25-1/2 |
| Engine RPM | 3600 |
| Material of Construction | Aluminum, Cast Iron |
| GPM of Water @ 50 Ft. of Head | 230 |
| Volute/Wear Plate | Cast Iron |
| Tank Capacity | 1.6 gal |
| Application | Dewatering |
| Outlet | 3 |
| Max. Head | 90 ft |
| Sensor Type | Low Oil |
| Mechanical Seal | Silicon Carbide |
| GPM of Water @ 30 Ft. of Head | 290 |
| Engine Size | 242 cc |
| GPM of Water @ 40 Ft. of Head | 260 |
| GPM of Water @ 70 Ft. of Head | 140 |
| Roll Bar Frame | Steel |
| Check Valve | Buna-N |
| Pump Mechanism | Centrifugal |
| Discharge Dia. | 3 in |
| Frame Design | Full-Frame |
| Frame Material | Steel |
| Power Source | Gas |
| Inlet Gender | Male |
| Overall Length | 27 1/2 in |
| Discharge Gender | Male |
| Flow Rate @ 20 Ft. of Head | 320 gpm |
| Discharge Standard | NPT |
| Volute Material | Cast Iron |
| Overall Height | 25 1/2 in |
| Flow Rate @ 80 Ft. of Head | 75 gpm |
| Body Material | Cast Iron |
| Impeller Design | Semi-Open |
| Flow Rate @ 40 Ft. of Head | 260 gpm |
| Inlet Dia. | 3 in |
| Maximum Self-Priming Lift | 20 ft |
| Discharge | 3 in MNPT |
| Maximum Discharge Pressure | 39 psi |
| Max. Liquid Temp. | 104 Degrees F |
| Flow Rate @ 10 Ft. of Head | 350 gpm |
| Overall Width | 20 in |
| Max. Diameter Solids | 1-1/2 in |
| Flow Rate @ 60 Ft. of Head | 180 gpm |
| RPM | 3,600 RPM |
| Manufacturers Warranty Length | 2 yr |
| Inlet Standard | NPT |
| Frame Design - Pumps | Full Tubular Frame |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |
3" 8 HP Honda Powered Trash Pump, Tsurumi, Mfr#: EPT3-80HA
$1936,00
Free shipping will be applied on orders over $50
Engine Driven Utility Pump, Engine Size 242 cc, HP 8 hp, Tank Capacity 1.6 gal, Ignition Type Recoil-Start, Pump Mechanism Centrifugal, Body Material Cast Iron, Volute Material Cast Iron, Seal Material Silicon Carbide, Frame Material Steel, Flow Rate @ 10 Ft. of Head 350 gpm, Flow Rate @ 20 Ft. of Head 320 gpm, Flow Rate @ 40 Ft. of Head 260 gpm, Flow Rate @ 60 Ft. of Head 180 gpm, Flow Rate @ 80 Ft. of Head 75 gpm, Max. Head 90 ft, Max. Suction Lift 26 ft, Maximum Self-Priming Lift 20 ft
9999 in stock
Must order in multiples of 1
Subtotal:
$1936
You must be logged in to post a review.
Reviews
There are no reviews yet.