| Property | Value |
|---|---|
| Includes | 2P567- 2 in x 20 ft Green Suction Hose, 1FYR3- 2 inx 50 ft Blue Discharge Hose (2 ea), 1P690- 2 in Strainer |
| Engine RPM | 3600 |
| Height | 15-1/2 |
| Ignition Type | Electronic |
| Volute/Wear Plate | Cast Iron |
| Seal Material | Buna N, Silicon Carbide |
| GPM of Water @ 50 Ft. of Head | 115 |
| Width | 17-1/8 |
| GPM of Water @ 40 Ft. of Head | 133 |
| Temp. Range | 35 Degrees to 105 Degrees F |
| Material of Construction | Aluminum |
| Agency Compliance | EPA and CARB Certified Engine |
| Sensor Type | Low Oil |
| GPM of Water @ 60 Ft. of Head | 90 |
| Length | 22-1/2 |
| GPM of Water @ 20 Ft. of Head | 157 |
| Casing Adapter | Aluminum |
| Max. Head | 88 ft |
| GPM of Water @ 80 Ft. of Head | 30 |
| Impeller Material | Cast Iron |
| Solids Handling Capacity | 13/16 |
| Inlet | 2 in NPSM |
| GPM of Water @ 70 Ft. of Head | 61 |
| GPM of Water @ 30 Ft. of Head | 148 |
| HP | 4 13/16 hp |
| Number of Impellers | 1 |
| Application | Trash |
| Mechanical Seal | Silicon Carbide, Buna N |
| GPM of Water @ 10 Ft. of Head | 165 |
| Roll Bar Frame | Steel |
| Max. Suction Lift | 25 ft |
| Engine/Motor Type | Gas |
| Item | Engine Driven Utility Pump |
| Outlet | 2 |
| Check Valve | Buna N |
| Impeller Type | Semi-Open |
| Max. Pressure | 38 psi |
| Engine Brand | Honda OHV |
| Engine Size | 163 cc |
| Tank Capacity | 0.95 gal |
| Overall Width | 17 1/8 in |
| Max. Diameter Solids | 13/16 in |
| Flow Rate @ 10 Ft. of Head | 165 gpm |
| Flow Rate @ 40 Ft. of Head | 133 gpm |
| Flow Rate @ 60 Ft. of Head | 90 gpm |
| Inlet Dia. | 2 in |
| Maximum Discharge Pressure | 38 psi |
| Body Material | Aluminum |
| Overall Height | 15 1/2 in |
| Discharge Standard | NPSM |
| Overall Length | 22 1/2 in |
| Frame Design | Full-Frame |
| Flow Rate @ 20 Ft. of Head | 157 gpm |
| Inlet Standard | NPSM |
| Discharge Dia. | 2 in |
| Flow Rate @ 80 Ft. of Head | 30 gpm |
| Power Source | Gas |
| Impeller Design | Semi-Open |
| Frame Material | Steel |
| Volute Material | Cast Iron |
| Pump Mechanism | Centrifugal |
| Discharge | 2 in NPSM |
| RPM | 3,600 RPM |
| Frame Design - Pumps | Full Tubular Frame |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |
Engine Drive Pump Kit, 4.8HP, Honda Engine, Dayton, Mfr#: 7AJ14
$1502,99
Free shipping will be applied on orders over $50
Engine Driven Utility Pump, Engine Size 163 cc, HP 4 13/16 hp, Tank Capacity 0.95 gal, Ignition Type Electronic, Pump Mechanism Centrifugal, Body Material Aluminum, Volute Material Cast Iron, Seal Material Buna N, Silicon Carbide, Frame Material Steel, Flow Rate @ 10 Ft. of Head 165 gpm, Flow Rate @ 20 Ft. of Head 157 gpm, Flow Rate @ 40 Ft. of Head 133 gpm, Flow Rate @ 60 Ft. of Head 90 gpm, Flow Rate @ 80 Ft. of Head 30 gpm, Max. Head 88 ft, Max. Suction Lift 25 ft
9999 in stock
Must order in multiples of 1
Subtotal:
$1502.99
You must be logged in to post a review.
Reviews
There are no reviews yet.