| Property | Value |
|---|---|
| For Use With | Chemical Transfer |
| Housing Material | Polypropylene |
| Includes | Clamp, Hose, Motor, Pump |
| Inlet Size | 1-1/4 |
| Motor Type | Universal AC |
| Voltage | 115VAC |
| Action Type | Piston |
| Max. Flow GPM | 17 gpm |
| Application | For Transferring Antifreeze Solvents, Thinners, Automotive Additives, industrial Chemicals, Oil Based Fluids and Other Non Corrosive Fluids |
| DEF Compatible | No |
| Overall Length | 49 in |
| Discharge Tube Outlet ID Size | 3/4 |
| Manufacturers Warranty Length | 1 yr. |
| Suction Tube Length | 40 in |
| Max. GPM for Water | 17 |
| Adapter Type | Bung |
| Max. Liquid Temp. | 150 Degrees F |
| Item | Electric Operated Drum Pump |
| pH Range | 6 to 10 |
| Motor Enclosure | ODP |
| HP | 1/3 |
| Discharge Tubing Material | PVC |
| Phase | 1 |
| Agency Compliance | CSA |
| Discharge Tube Outlet OD Size | 1 |
| Hz | 60 |
| Wetted Materials | 316 Stainless Steel and PVC, FKM, Polypropylene, PTFE |
| Suction Tube Type | Intake Tube |
| Max. Head | 5 to 20 ft. |
| Suction Tube Outlet O.D. Size | 1-1/4 |
| Self-Priming | Yes |
| RPM | 6000 to 13,000 |
| Adapter Dia. | 2 |
| Max. GPM for Oil | 7 |
| Adapter Material | Polypropylene |
| Height | 40 |
| Metered | No |
| Max. Viscosity | 300 cps |
| Standards | CSA Certified |
| Pump Body Material | Polypropylene |
| Outlet Size | 3/4 |
| Seal Material | Fluoroelastomer |
| Type | Motor and Tube |
| Max. Pressure | 8 psi |
| Discharge Tube Length | 5 ft. |
| GPM | 7 to 17 |
| Max. Temp. | 150 Degrees F |
| Noise Level | 74 db |
| Duty Cycle | Continuous |
| Suction Tube Material | Polypropylene |
| For Container Size | 55 gal |
| Not Recommended Chemicals | Acetic Acid (Glacial), Acetone, Ammonia (Liquids), Anhydrous Ammonia, Automatic Transmission Fluid, Biodiesel, Brake Fluid, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 5%, Chromic Acid 50%, Cyclohexane, DEF, Diesel Fuel, E85, Ethyl (Ethanol), Ethyl Acetate, Formaldehyde, Formaldehyde 40%, Gasoline, Glycerin, Heptane, Hexane, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Hydrazine, Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Isopropyl (Isopropanol), Kerosene, Lacquer Thinners, Methyl (Methanol), Methyl Ethyl Ketone (MEK), Naphtha, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Paint Thinner, Sodium Hypochlorite/Bleach (to 20%), Stoddard Solvent (Mineral Spirits), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Sulfuric Acid (to 10%), Toluene, Trichlorethylene (50%), Turpentine, Windshield Washer Fluid, Xylene |
| Includes Discharge Hose | Yes |
| Cord Length | 12 ft |
| Compatible Chemicals | Acetic Acid 20%, Acetic Acid 80%, Ammonium Hydroxide, Antifreeze (Coolant), Calcium Chloride, Citric Acid 50%, Deionized Water, Ethylene Glycol, Fertilizers, Formic Acid, Fresh Water, Fungicides, Herbicides, Phosphoric Acid (40% Solution), Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%) |
| Series | EF |
| Discharge Tube Outlet OD | 1 in |
| Suction Tube ID | 1 1/4 in |
| Thermal Protection | No |
| Suction Tube OD | 1 1/4 in |
| Hose Outside Dia. | 1 in |
| Discharge Connection Type | Hose Barb |
| Bung Connection Dia. | 2 in |
| Frequency (Hz) | 60 Hz |
| Max. Flow Rate | 17 gpm |
| Plug Type | NEMA 5-15 |
| Discharge Tube Outlet ID | 3/4 in |
| Hose Length | 60 in |
| Food Grade | No |
| Motor HP | 1/3 hp |
| Includes Bung Adapter | No |
| Power Source | Electric |
| For Media Type | Acetic Acid, Ammonium Hydroxide, Antifreeze, Calcium Chloride, Citric Acid, Ethylene Glycol, Fertilizers, Formic Acid, Fungicides, Herbicides, Phosphoric Acid (40% Solution), Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide, Water |
| Hose Tube Material | PVC |
| Max. Head - Pumps | 20 ft |
| Height Above Container | 8 5/8 in |
| Hose Inside Dia. | 3/4 in |
| Motor RPM | 8000 to 14,000 |
| For Container Type | Drum |
| Min. Fluid Temp. | 0 Degrees F |
| Housing Material - Pumps | Polypropylene |
| Full Load Amps | 2.0 A |
| Diesel Exhaust Fluid Compatible | No |
| Runs Dry | No |
| Pump Connection Type | Smooth Bore |
| Max. Fluid Temp. | 150 Degrees F |
| Includes Suction Tube | Yes |
| Number of Phases | 1 |
| Variable Speed | Yes |
| Includes Nozzle | No |
| Max. Head Pressure | 8 psi |
| Explosion Proof | No |
| Grease | NT |
| Gear Lube | NT |
| Max. Outlet Pressure | 8 psi |
| Rated Voltage | 115V AC |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
1/3 HP 115 VAC 60 Hz Drum Pump, Finish Thompson, Mfr#: EFP-40 & S1 Kit
$446,99
Free shipping will be applied on orders over $50
Electric Operated Drum Pump, Hose Inside Dia. 3/4 in, Max. Head Pressure 8 psi, Max. Outlet Pressure 8 psi, For Use With Chemical Transfer, Rated Voltage 115V AC, Plug Type NEMA 5-15, Suction Tube OD 1 1/4 in, Hose Length 60 in, Suction Tube Length 40 in, Cord Length 12 ft, Includes Bung Adapter No, Runs Dry No, Thermal Protection No, Frequency (Hz) 60 Hz, Power Source Electric, Variable Speed Yes, Includes Discharge Hose Yes, Self-Priming Yes
9999 in stock
Must order in multiples of 1
Subtotal:
$446.99
You must be logged in to post a review.
Reviews
There are no reviews yet.