| Property | Value |
|---|---|
| Item | Plasma Cutter |
| Input Voltage | 208 V, 230 V, 460 V |
| Series | Cutmaster 58 |
| Ground Cord Length | 20 ft |
| Effective Input Current | 208-230 VAC |
| Welding Processes | Plasma Cutting |
| Plug Type | L15-30P |
| Standards | IP-23C, CSA, NTRL/C, CE, CCC |
| Phase | Three-Phase |
| Overall Width | 12 in |
| Cutting Cable Length | 20 ft |
| Plasma Cutter Model | 1-5830-1 |
| Overall Height | 15 in |
| Required Air Flow | 6.7 cfm |
| For Material Type | Aluminum, Stainless Steel, Steel |
| For Maximum Material Thickness | 1 in |
| Open Circuit Voltage | 260 V DC |
| Power Cord Length | 10 ft |
| Maximum Output Current | 60 A |
| Plasma Torch Type | Handheld |
| Overall Depth | 24 in |
| Cutting Configuration | Drag Cutting, Fine Cutting, Gouging, Standard Cutting |
| Input Frequency | 50/60 Hz |
| Maximum Pressure - Air Compressor | 75 psi |
| Plasma Gas Type | Air |
| Plasma Cutting Output @ Duty Cycle | 100% @ 30 A, 40% @ 60 A, 60% @ 50 A |
| For Minimum Material Thickness | 0.5 mm |
| Color | Green |
| Plasma Cutting Minimum Output Current | 10 A |
| Max. Input Current | 45 A @ 230 V, 1 ph |
| Weight | 43 lb |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |
ESAB Cutmaster 58 Plasma Cut System, Thermal Dynamics, Mfr#: 1-5830-1
$2732,99
Free shipping will be applied on orders over $50
Plasma Cutter, Cutting Configuration Drag Cutting, Fine Cutting, Gouging, Standard Cutting, Effective Input Current 208-230 VAC, For Material Type Aluminum, Stainless Steel, Steel, For Maximum Material Thickness 1 in, For Minimum Material Thickness 0.5 mm, Input Frequency 50/60 Hz, Input Voltage 208 V, 230 V, 460 V, Max. Input Current 45 A @ 230 V, 1 ph, Open Circuit Voltage 260 V DC, Phase Three-Phase, Plasma Cutter Model 1-5830-1, Maximum Output Current 60 A
9999 in stock
Must order in multiples of 1
Subtotal:
$2732.99
You must be logged in to post a review.
Reviews
There are no reviews yet.