| Property | Value |
|---|---|
| Gearmotor Type | DC Gearmotor |
| Item | DC Gearmotor |
| Motor Type | Permanent Magnet DC |
| Gearmotor Voltage | 90V DC |
| Shaft Orientation | Parallel |
| Enclosure | TENV |
| Nameplate RPM | 13 RPM |
| Gearmotor Shaft Type | Single |
| Gearmotor Shaft Orientation | Parallel |
| Voltage | 90VDC |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gear Ratio | 135:1 |
| Full Load Amps | 0.84 A |
| Brushes | Externally Replaceable |
| Max. Torque | 250 in-lb |
| Mounting | All Position |
| Gearmotor Rotation | CW/CCW |
| Input HP | 1/15 |
| Seals | O-ring Type on Output Shaft |
| Shaft Dia. (Dimension U) | 3/4 |
| Lubrication | Grease Filled |
| Keyway Size Type | #605 Woodruff Key |
| Replacement Brushes | 6YHY6 |
| Thermal Protection | None |
| Rotation | CW/CCW |
| Overhung Load | 250 lb |
| Shaft Length (Dimension V) | 1-1/2 |
| Gear Material | Hardened Steel, Phenolic |
| Reversible Shaft Output | No |
| Max. Ambient Temp. | 40 Degrees C |
| Overall Length | 10 in |
| Finish | Unpainted |
| Housing Material | Die Cast Zinc |
| Standards | C-UL Recognized, UL Recognized |
| Shaft | Single Output |
| Rear Shaft Encoder/Pulse Generator Mounting | No |
| Gearmotor Mounting Position | All Angle |
| Tachometer Feedback | No |
| Keyway Size | #605 Woodruff Key |
| Length Less Shaft | 8.5 in |
| Insulation Class | F |
| Bearings | Ball on Motor, Porous Bronze Sleeve on Case |
| Gear Case | Die Cast Zinc |
| RPM Range | 0 to 15 |
| Bearing Type | Ball on Motor, Porous Bronze Sleeve on Case |
| Mounting Orientation | Any Angle |
| Seal Type | O-Ring Type on Output Shaft |
| Keyway Type | Woodruff #605 |
| Overhung Load Capacity | 250 ft-lb |
| Operating Voltage | 90V DC |
| Maximum Ambient Temperature | 40 Degrees C |
| Output Shaft Length | 1 1/2 in |
| Housing Material Finish | Unpainted |
| Input Horsepower | 1/15 hp |
| Maximum Torque | 250 in-lb |
| Replaceable Motor Brushes | Yes |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Output Shaft Diameter | 3/4 in |
| Nameplate Speed | 13 RPM |
| Full Load Current | 0.84 A |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
DC Gearmotor, 13 rpm, 90V, TENV, Dayton, Mfr#: 1LPK8
$413,99
Free shipping will be applied on orders over $50
DC Gearmotor, Shaft Orientation Parallel, Motor Enclosure Totally Enclosed Nonventilated, Operating Voltage 90V DC, Motor Type Permanent Magnet DC, Nameplate Speed 13 RPM, Maximum Torque 250 in-lb, Overhung Load Capacity 250 ft-lb, Rotation CW/CCW, Mounting Orientation Any Angle, Gear Ratio 135:1, Input Horsepower 1/15 hp, Output Shaft Diameter 3/4 in, Bearing Type Ball on Motor, Porous Bronze Sleeve on Case
9999 in stock
Must order in multiples of 1
Subtotal:
$413.99
You must be logged in to post a review.
Reviews
There are no reviews yet.