Property | Value |
---|---|
Item | Cylindrical Ultrasonic Sensor |
Circuit Type | Analogue |
Length | 0.71 in |
Width | 0.71 in |
Depth | 2.52 in |
Electrical Connection | 5 Pin M12 Male Connector |
Diameter | 18 mm |
Power Required | 10 to 30V DC |
Output | 4 to 20mA |
IP Rating | 65, 67 |
Case Material | Stainless steel 316L |
Operating Frequency | 200 kHz |
Operating Temp. Range | -13 Degrees F to 158 Degrees F |
Response Time | 100 msec |
Description/Special Features | With synchronization mode, Software configurable |
Standards | CSA C22.2 No 14, EN/IEC 60947-5-2, UL 508 |
Material | metal |
Length (Straight Wireway) | 0.71 in |
Height | 18 mm |
Threaded Length | 45 mm |
Wiring Technique | 5-wire |
Ip Degree Of Protection | IP65 conforming to IEC 60529 || IP67 |
Resistance To Fast Transients | 1 kV level 3 IEC 61000-4-4 |
Shock Resistance | 30 gn in all 3 axes 11 ms IEC 60068-2-27 |
Maximum Delay Recovery | 100 ms |
Sensor Name | XXS |
Setting-Up | teach mode || configurator software |
[Sd] Sensing Range | 0.105-1 m |
Sensor Type | ultrasonic sensor |
Vibration Resistance | +/-1 mm 10-55 Hz)IEC 60068-2-6 |
Product Certifications | EAC || cULus || E2 || RCM || Ecolab |
Ambient Air Temperature For Operation | -25-70°C |
Ambient Air Temperature For Storage | -40-80°C |
Function Available | with synchronisation mode || software configurable |
Deviation Angle From 90° Of Object To Be Detected | -10-10° |
Front Material | epoxy || rubber || resin |
Current Consumption | 30 mA |
Resistance To Electromagnetic Fields | 10 V/m level 3 IEC 61000-4-3 |
Resistance To Electrostatic Discharge | 8 kV level 4 IEC 61000-4-2 |
[Sa] Assured Operating Distance | 0.105-1 m teach mode) |
Transmission Frequency | 200 kHz |
Detection System | diffuse |
Analogue Output Function | 4...20 mA |
Maximum Switching Capacity | 250 Ohm 12 V DC overload and short-circuit protection || 850 Ohm 24 V DC |
Series Name | general purpose |
Marking | CE |
Type Of Output Signal | analogue |
Sensor Design | cylindrical M18 |
Supply Voltage Limits | 10-30 V DC |
Blind Zone | 105-105 mm |
Status Led | output state 1 LED yellow) || echo state 1 LED green) |
Maximum Delay First Up | 180 ms |
Enclosure Material | stainless steel 316L |
[Sn] Nominal Sensing Distance | 1-1 m adjustable with remote teach push-button || 1-1 m software with kit |
[Us] Rated Supply Voltage | 12...24 V DC reverse polarity protection |
Repeat Accuracy | 0.001 |
Minimum Size Of Detected Object | cylinder diameter 1 mm 600 mm |
Deviation Angle From 90° Of Object To Be Detected | -10-10° |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Cylindrical Ultrasonic Sensor, SS Case, Telemecanique Sensors, Mfr#: XXS18S1AM12
$375,99
Free shipping will be applied on orders over $50
Cylindrical Ultrasonic Sensor, Case Material Stainless steel 316L, Diameter 18 mm, 4 to 20mA Output, Circuit Type Analogue, Electrical Connection 5 Pin M12 Male Connector, Length 0.71 in, Width 0.71 in, Depth 2.52 in, Power Required 10 to 30V DC, IP Rating 65, 67, Operating Frequency 200 kHz, Standards CSA C22.2 No 14, EN/IEC 60947-5-2, UL 508, Operating Temp. Range -13 Degrees F to 158 Degrees F, Description/Special Features With synchronization mode, Software configurable
9999 in stock
Must order in multiples of 1
Subtotal:
$375.99
You must be logged in to post a review.
Reviews
There are no reviews yet.