| Property | Value |
|---|---|
| Item - Jaw Coupling Hubs | Curved Jaw Coupling Hub |
| Size - Jaw Couplings | MJC19 |
| Bore Dia. | 7 mm |
| Keyway Size Type | None |
| Material - Hubs | Aluminum |
| Outside Dia. | 19.1 mm |
| Assembled Coupling Length | 27.2 mm |
| Overall Length | 27.2 mm |
| Item | Jaw Coupling Hub |
| Material | Aluminum |
| Keyway Size | None |
| Size | MJC19 |
| Coupling Size | MJC19 |
| Bore Tolerance | +0.05/-0.00 mm |
| Screw Material | Alloy Steel |
| Screw Material Finish | Black Oxide |
| Outside Diameter | 19.1 mm |
| Keyway Depth | Not Applicable |
| Recommended Hub Gap | 0.5 mm |
| Jaw Profile | Curved |
| Maximum Speed | 8,000 RPM |
| Hub Projection | 9.8 mm |
| Hub Material | Aluminum |
| Length through Bore | 9.8 mm |
| Number of Locking Screws | 1 |
| Fail Safe | Yes |
| Coupling Overall Length | 27.2 mm |
| Bore Diameter | 7 mm |
| Included Screws | Hex Socket Cap Screw |
| Zero Backlash | Yes |
| Shaft Tolerance | +0.000/-0.013 mm |
| Hub Diameter | 19.1 mm |
| Minimum Operating Temperature | -23 Degrees C |
| Weight | 0 lb |
| Keyway Width | Not Applicable |
| Bore Type | Round Bore |
| Full Bearing Support Required | Yes |
| Screw Thread Size | M2.5 |
| Maximum Operating Temperature | 82 Degrees C |
| Hub Material Grade | 2024 |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015, REACH Compliant, RoHS Compliant |
| Shaft Locking Type | Clamp On |
| System of Measurement | Metric |
| Hub Material Finish | Bright |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Jaw Coupling Hub, 7mm, Aluminum, Ruland, Mfr#: MJC19-7-A
$16,19
Free shipping will be applied on orders over $50
Jaw Coupling Hub, Coupling Size MJC19, Outside Diameter 19.1 mm, Coupling Overall Length 27.2 mm, System of Measurement Metric, Hub Material Aluminum, Maximum Speed 8,000 RPM, Keyway Depth Not Applicable, Keyway Width Not Applicable, Bore Diameter 7 mm, Shaft Locking Type Clamp On, Bore Type Round Bore, Jaw Profile Curved, Screw Thread Size M2.5, Bore Tolerance +0.05/-0.00 mm, Fail Safe Yes, Shaft Tolerance +0.000/-0.013 mm, Full Bearing Support Required Yes, Hub Diameter 19.1 mm
9999 in stock
Must order in multiples of 1
Subtotal:
$16.19
You must be logged in to post a review.
Reviews
There are no reviews yet.