Property | Value |
---|---|
Item | Contact Cement |
Type | Open Head Drum |
Application | Very porous material may require more than one coat. (Allow adhesive to dry completely between coats.) A uniform, glossy film indicates sufficient adhesive. |
Characteristics | High temperature resistant, Non-flammable, Up to a four hour bonding range, Very high strength |
For Use On | Porous or Non-Porous |
Materials Bonded | Cardboard, Ceramic, Cork, Fabric, Felt, Fiberglass, Foam, Glass, Hardboard, Laminate, Leather, Metal, Paper, Plastic, Rubber, Wood |
Color | Light Orange |
Container Size | 270 gal |
Container Type | Pail |
Temp. Range | -40 to 200 |
Working Time | 30 min |
Flammability | Nonflammable |
Green Environmental Attribute | Does Not Contain Methylene Chloride, Meets SCAQMD Requirements |
Adhesive Color | Clear |
Flammable/Non Flammable | Non-Flammable |
Green Certification or Other Recognition | GREENGUARD Certified |
Temp. Range (F) | -40 to 200 |
Size | 55 gal |
Substrates | Foamed Plastics, Plastic Laminate, Wood Plywood Veneer, and Canvas |
Standards | California Air Resources Board, Greenguard Certified, LEED, SCAQMD |
Full Cure | 30 min |
Functional Cure | 4 hr |
Water Resistance | Water-Resistant |
Chemical Base | Polychloroprene |
Consistency | Thin Liquid |
Primary Applications | General Purpose |
Maximum Viscosity | 750 cps |
Minimum Application Temperature | -40 Degrees F |
Heat Resistant | Yes |
For Surface Type | Porous or Non-Porous |
Application Method | Brush On, Roll On, Spray On |
Low Odor | Yes |
Maximum Performance Temperature | 180 Degrees F |
Series | 30NF |
Features | Long Bonding Range, Water-Based |
Full Cure Time | 30 min |
VOC Content Weight | Less Than 80 g/L |
Maximum Application Temperature | 65 Degrees F |
Application Method - Adhesives | Brush On, Roll On, Spray On |
Container Size - Adhesives | 55 gal |
Container Type - Adhesives | Pail |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Contact Cement, 30NF Series, Light Orange, 270 gal, Pail, 3M, Mfr#: 30NF
$3832,99
Free shipping will be applied on orders over $50
3M Fastbond Contact Adhesive 30NF is a low-odor, water-based adhesive designed to deliver a high-strength, high-coverage bond with a bonding range of 4 hours. Post-formable and high-temperature-resistant, this adhesive is non-flammable in the wet state. 3M Fastbond Contact Adhesive 30NF is proven to bond combinations of most foamed plastics, plastic laminate, wood, plywood, wood veneer, and canvas.
9999 in stock
Subtotal:
$3832.99
You must be logged in to post a review.
Reviews
There are no reviews yet.