| Property | Value |
|---|---|
| Item | Chemical Resistant Centrifugal Pump |
| HP | 3 hp |
| Housing Material | Polypropylene |
| Phase | Three |
| Voltage | 230/460 |
| Max. GPM @ Head | 123 gpm @ 10 ft |
| Max. Head | 95 ft |
| Best Efficiency GPM @ Head | 80 gpm @ 60 ft |
| Inlet | 1-1/2 in NPT |
| Outlet | 1-1/2 in NPT |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Application | Aggressive Liquid Applications, and Other General Purpose Pumping, Booster Service, Irrigation, Jockey Pump Service, Moderate Flow at Moderate Head Pressure, Spraying Systems, Transfer of Non-Flammable Liquids, Water Circulation |
| Motor RPM | 3,450 RPM |
| Wetted Materials | Buna-N, Carbon, Ceramic, Polypropylene, Stainless Steel |
| Seal Type | Mechanical |
| GPM of Water @ 20 Ft. of Head | 115 |
| GPM of Water @ 15 Ft. of Head | 119 |
| Shaft Material | Stainless Steel |
| Max. Specific Gravity | 1.0 |
| GPM of Water @ 50 Ft. of Head | 86 |
| Volute Material | Polypropylene |
| Port Rotation | None |
| Max. Liquid Temp. | 140 Degrees F |
| Max. Fluid Viscosity | 100 SUS |
| Width | 10 in |
| Impeller Material | Polypropylene |
| GPM of Water @ 70 Ft. of Head | 63 |
| Inlet Pressure | 75 psi |
| Max. Case Pressure | 100 psi |
| GPM of Water @ 40 Ft. of Head | 97 |
| Screw Material | Stainless Steel |
| Seal Material | Buna-N, Carbon, Ceramic, Stainless Steel |
| GPM of Water @ 10 Ft. of Head | 123 |
| Length | 18 1/8 in |
| GPM of Water @ 30 Ft. of Head | 106 |
| Amps | 7.2/3.6 |
| Best Efficiency Range GPM @ Head | 48 to 106 gpm @ 80 to 30 ft |
| Includes | Manual |
| GPM of Water @ 25 Ft. of Head | 110 |
| NEMA/IEC Frame | 56J |
| Manufacturers Warranty Length | 1 yr |
| Height | 7 1/2 in |
| Agency Compliance | c UL us |
| GPM of Water @ 80 Ft. of Head | 48 |
| Max. Dia. Solids | 1/4 in |
| Duty | Continuous |
| Hz | 60 |
| Impeller Type | Closed |
| Drain Plug | Yes |
| Service Factor | 1.15 |
| GPM of Water @ 60 Ft. of Head | 76 |
| Bearing Type | Ball |
| Min. GPM @ Head | 48 gpm @ 80 ft |
| Motor Type | Not Applicable |
| Overall Height | 7.5 in |
| Overall Length | 18.1 in |
| Overall Width | 10 in |
| Standards | cULus Listed |
| Discharge Port | 1 1/2 in NPT |
| Cord Length | Not Applicable |
| Frequency | 60 Hz |
| Flow Rate @ 15 ft of Head (Maximum) | 119 gpm |
| Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
| Intake Pipe Size | 1 1/2 in |
| Nameplate Voltage | 230/460V AC |
| Media Temperature (Maximum) | 140 Degrees F |
| Flow Rate @ 30 ft of Head (Maximum) | 106 gpm |
| Flow Rate @ 40 ft of Head (Maximum) | 97 gpm |
| Wetted Material | Buna-N, Carbon, Ceramic, Polypropylene, Stainless Steel |
| Flow Rate (Maximum) | 123 gpm |
| Feet of Head (Maximum) | 95 ft |
| Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
| Shut Off Pressure (Maximum) | 85 ft of head |
| Ambient Temperature (Minimum) | Not Applicable |
| Impeller Design | Closed |
| Solid Diameter (Maximum) | 0.25 in |
| Best Efficiency Head | 60 ft |
| Ambient Temperature (Maximum) | 104 Degrees F |
| Current | 7.2 or 3.6 A |
| Intake Pipe Type | NPT |
| Suction Port | 1 1/2 in NPT |
| Flow Rate @ 60 ft of Head (Maximum) | 76 gpm |
| Flow Rate @ 10 ft of Head (Maximum) | 123 gpm |
| Discharge Pipe Type | NPT |
| Flow Rate @ 70 ft of Head (Maximum) | 63 gpm |
| Horsepower (Maximum) | 3 hp |
| Flow Rate @ 80 ft of Head (Maximum) | 48 gpm |
| Discharge Pipe Size | 1 1/2 in |
| Discharge Rotation | None |
| Shaft Outer Diameter | 5/8 in |
| Compatible Motor Frame | 56J NEMA |
| Best Efficiency Flow | 80 gpm |
| Priming | Manual |
| Electrical Connection Type | Hardwired |
| Specific Gravity (Maximum) | 1 |
| Media Temperature (Minimum) | Not Applicable |
| Duty Cycle | Continuous |
| Flow Rate @ 20 ft of Head (Maximum) | 115 gpm |
| Flow Rate @ 25 ft of Head (Maximum) | 110 gpm |
| Viscosity (Maximum) | 100 SUS |
| Case Pressure (Maximum) | 100 psi |
| Flow Rate (Minimum) | 48 gpm |
| For Use With Potable Systems | No |
| Motor Speed (Maximum) | 3,450 RPM |
| Country of Origin (subject to change) | India |
| Package Quantity | 1 |
Centrifugal Pump, 3 HP, 3 Ph, 208-230/460V, Dayton, Mfr#: 2YEU5
$1007,99
Free shipping will be applied on orders over $50
Centrifugal Pump, Discharge Pipe Size 1 1/2 in, Discharge Pipe Type NPT, Feet of Head (Maximum) 95 ft, Flow Rate (Maximum) 123 gpm, Horsepower (Maximum) 3 hp, Housing Material Polypropylene, Impeller Design Closed, Impeller Material Polypropylene, Intake Pipe Size 1 1/2 in, Intake Pipe Type NPT, Media Temperature (Maximum) 140 Degrees F, Phase Three, Shut Off Pressure (Maximum) 85 ft of head, Viscosity (Maximum) 100 SUS, Flow Rate @ 10 ft of Head (Maximum) 123 gpm
9999 in stock
Must order in multiples of 1
Subtotal:
$1007.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.