| Property | Value |
|---|---|
| HP | 2 hp |
| Item | Chemical Resistant Centrifugal Pump |
| Housing Material | Polypropylene |
| Phase | Single |
| Voltage | 115/208-230 |
| Max. GPM @ Head | 96 gpm @ 10 ft |
| Max. Head | 91 ft |
| Best Efficiency GPM @ Head | 58 gpm @ 60 ft |
| Inlet | 1-1/2 in NPT |
| Outlet | 1-1/2 in NPT |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| GPM of Water @ 60 Ft. of Head | 58 |
| NEMA/IEC Frame | 56J |
| GPM of Water @ 15 Ft. of Head | 92 |
| GPM of Water @ 70 Ft. of Head | 47 |
| Length | 16 5/8 in |
| Application | Aggressive Liquid Applications, and Other General Purpose Pumping, Booster Service, Irrigation, Jockey Pump Service, Moderate Flow at Moderate Head Pressure, Spraying Systems, Transfer of Non-Flammable Liquids, Water Circulation |
| Impeller Type | Closed |
| Max. Dia. Solids | 1/4 in |
| GPM of Water @ 10 Ft. of Head | 96 |
| Best Efficiency Range GPM @ Head | 40 to 83 gpm @ 75 to 30 ft |
| Motor RPM | 3,450 RPM |
| GPM of Water @ 80 Ft. of Head | 31 |
| Port Rotation | None |
| Max. Specific Gravity | 1.0 |
| GPM of Water @ 30 Ft. of Head | 83 |
| Seal Material | Buna-N, Carbon, Ceramic, Stainless Steel |
| GPM of Water @ 25 Ft. of Head | 86 |
| Max. Case Pressure | 100 psi |
| Shaft Material | Stainless Steel |
| Manufacturers Warranty Length | 1 yr |
| Inlet Pressure | 75 psi |
| GPM of Water @ 40 Ft. of Head | 77 |
| Hz | 60 |
| Bearing Type | Ball |
| Service Factor | 1.2 |
| Screw Material | Stainless Steel |
| Includes | Manual |
| GPM of Water @ 50 Ft. of Head | 68 |
| Height | 7 1/2 in |
| GPM of Water @ 20 Ft. of Head | 89 |
| Agency Compliance | c UL us |
| Min. GPM @ Head | 31 gpm @ 80 ft |
| Impeller Material | Polypropylene |
| Duty | Continuous |
| Width | 7 5/8 in |
| Seal Type | Mechanical |
| Volute Material | Polypropylene |
| Max. Liquid Temp. | 140 Degrees F |
| Amps | 16.6/9.4-8.3 |
| Max. Fluid Viscosity | 100 SUS |
| Drain Plug | Yes |
| Wetted Materials | Buna-N, Carbon, Ceramic, Polypropylene, Stainless Steel |
| Motor Type | Capacitor Start Capacitor Run |
| Overall Width | 7.6 in |
| Overall Length | 16.6 in |
| Standards | cULus Listed |
| Overall Height | 7.5 in |
| Compatible Motor Frame | 56J NEMA |
| Flow Rate @ 20 ft of Head (Maximum) | 89 gpm |
| Specific Gravity (Maximum) | 1 |
| Impeller Design | Closed |
| Motor Speed (Maximum) | 3,450 RPM |
| Intake Pipe Type | NPT |
| Flow Rate @ 80 ft of Head (Maximum) | 31 gpm |
| Flow Rate (Minimum) | 31 gpm |
| Best Efficiency Flow | 58 gpm |
| Flow Rate @ 15 ft of Head (Maximum) | 92 gpm |
| Electrical Connection Type | Hardwired |
| Ambient Temperature (Minimum) | Not Applicable |
| Priming | Manual |
| Ambient Temperature (Maximum) | 104 Degrees F |
| Flow Rate @ 30 ft of Head (Maximum) | 83 gpm |
| Discharge Pipe Size | 1 1/2 in |
| Flow Rate @ 10 ft of Head (Maximum) | 96 gpm |
| Flow Rate @ 60 ft of Head (Maximum) | 58 gpm |
| Media Temperature (Maximum) | 140 Degrees F |
| Suction Port | 1 1/2 in NPT |
| Flow Rate (Maximum) | 96 gpm |
| Case Pressure (Maximum) | 100 psi |
| Flow Rate @ 70 ft of Head (Maximum) | 47 gpm |
| Discharge Pipe Type | NPT |
| Discharge Port | 1 1/2 in NPT |
| Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
| Viscosity (Maximum) | 100 SUS |
| Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
| Intake Pipe Size | 1 1/2 in |
| Frequency | 60 Hz |
| Wetted Material | Buna-N, Carbon, Ceramic, Polypropylene, Stainless Steel |
| Flow Rate @ 25 ft of Head (Maximum) | 86 gpm |
| Horsepower (Maximum) | 2 hp |
| Solid Diameter (Maximum) | 0.25 in |
| Shut Off Pressure (Maximum) | 82 ft of head |
| Best Efficiency Head | 60 ft |
| Media Temperature (Minimum) | Not Applicable |
| Current | 16.6 or 9.4 to 8.3 A |
| Discharge Rotation | None |
| Feet of Head (Maximum) | 91 ft |
| Flow Rate @ 40 ft of Head (Maximum) | 77 gpm |
| Cord Length | Not Applicable |
| Duty Cycle | Continuous |
| Shaft Outer Diameter | 5/8 in |
| Nameplate Voltage | 115/208-230V AC |
| For Use With Potable Systems | No |
| Country of Origin (subject to change) | India |
| Package Quantity | 1 |
Centrifugal Pump, 2 HP, 1 Ph, 115/208-230V, Dayton, Mfr#: 2YEU2
$940,99
Free shipping will be applied on orders over $50
Centrifugal Pump, Discharge Pipe Size 1 1/2 in, Discharge Pipe Type NPT, Feet of Head (Maximum) 91 ft, Flow Rate (Maximum) 96 gpm, Horsepower (Maximum) 2 hp, Housing Material Polypropylene, Impeller Design Closed, Impeller Material Polypropylene, Intake Pipe Size 1 1/2 in, Intake Pipe Type NPT, Media Temperature (Maximum) 140 Degrees F, Phase Single, Shut Off Pressure (Maximum) 82 ft of head, Viscosity (Maximum) 100 SUS, Flow Rate @ 10 ft of Head (Maximum) 96 gpm
9999 in stock
Must order in multiples of 1
Subtotal:
$940.99
You must be logged in to post a review.
Reviews
There are no reviews yet.