| Property | Value |
|---|---|
| Booster Pump Type | Booster Pump |
| Item | Pressure Booster Pump |
| HP - Pumps | 1/3 hp |
| Voltage - Pumps | 120/240V AC |
| Phase - Pumps | 1 |
| Inlet Size - Pumps | 1-1/2 in NPT |
| Outlet Size - Pumps | 1-1/4 in NPT |
| Number of Stages - Pumps | 1 |
| Max. Pressure - Pumps | 27 psi |
| Housing Material - Pumps | Cast Iron |
| Motor Enclosure - Pumps | Open Dripproof |
| Motor Enclosure | Open Dripproof (ODP) |
| Stages | 1 |
| Impeller Type | Closed |
| Inlet (In.) | 1-1/2 |
| Max. Pressure | 27 psi |
| Length | 15 1/8 in |
| Inlet | 1-1/2 |
| HP | 1/3 |
| Includes | Manual |
| Best Efficiency GPM @ PSI | 33 @ 19 |
| Seal Material | Buna-N, Carbon, Silicone Carbide, Stainless Steel |
| GPM @ 15 PSI | 38 |
| Max. Case Pressure | 100 psi |
| Manufacturers Warranty Length | 1 yr |
| GPM @ 20 PSI | 28 |
| Duty | Continuous |
| Max. PSI Boost @ 30 GPM | 18 |
| Max. PSI Boost @ 20 GPM | 22 |
| Motor Type | Capacitor-Start/Run |
| Agency Compliance | cULus |
| For Use With | Nonflammable Liquids Compatible with Pump Component Materials |
| Frame | 56J |
| Outlet | 1-1/4 |
| GPM @ 25 PSI | 20 |
| Width | 6 1/2 in |
| Phase | Single |
| Amps | 7.5/3.4 A |
| Wetted Materials | Buna N, Carbon, Cast Iron, Ceramic, Stainless Steel |
| Bearing Type | Double Sealed |
| Height | 8 3/4 in |
| Best Efficiency GPM @ Head | 33 @ 44 ft |
| Motor RPM | 3450 |
| Housing Material | Cast iron |
| Max. PSI Boost @ 2-10 GPM | 26 |
| Impeller Material | Stainless Steel |
| Motor Ambient Temp. Rating | 65 Degrees C |
| Voltage | 115/230 |
| Type | Booster |
| Hz | 60 |
| Overall Width | 6.5 in |
| Overall Height | 8.75 in |
| Standards | cULus Listed |
| Overall Length | 15.13 in |
| Horsepower | 1/3 hp |
| Motor Ambient Temperature (Maximum) | 149 Degrees F |
| Nominal Voltage | 115/230V AC |
| Pressure Boost (Maximum) | 26 psi |
| Pump Housing Material | Cast Iron |
| Maximum RPM | 3,450 RPM |
| Shut Off Pressure (Maximum) | 27 psi |
| Priming | Manual |
| Intake Size | 1 1/2 in |
| Best Efficiency Pressure | 19 psi |
| Wetted Material | Buna-N, Carbon, Cast Iron, Ceramic, Stainless Steel |
| Frequency | 60 Hz |
| Pumping Application | General Service in Farm, Liquid Transfer, Pressure Boosting, Water Supply |
| Duty Cycle | Continuous |
| Compatible Intake Pipe Size | 1 1/2 in |
| Case Pressure (Maximum) | 100 psi |
| Intake Type | NPT |
| Flow Rate @ 15 psi | 38 gpm |
| Mounting Orientation | Horizontal |
| For Use With Potable Systems | No |
| Discharge Type | NPT |
| Flow Rate @ 20 psi | 28 gpm |
| Number of Stages | 1 |
| Nameplate Voltage | 115/230V AC |
| Discharge Rotation | 90 Degrees |
| Motor Frame Designation | 56J NEMA |
| Compatible Discharge Pipe Size | 1 1/4 in |
| Motor Enclosure Type | ODP |
| Suction Lift (Maximum) | 25 ft |
| Impeller Design | Closed |
| Maximum Media Temperature | 200 Degrees F |
| For Use With Systems | Non-Potable |
| Motor Ambient Temperature (Minimum) | 65 Degrees F |
| Manufacturer Warranty Length | 1 yr |
| Compatible with Media Type | Water |
| Intake and Discharge Size | 1 1/2 in , 1 1/4 in |
| Country of Origin (subject to change) | India |
| Package Quantity | 1 |
Pressure Booster Pump, 1/3 hp, 120/240V AC, 1 Phase, 1-1/2 in NPT Inlet Size, 1 Stage, Dayton, Mfr#: 45MW11
$461,99
Free shipping will be applied on orders over $50
Booster Pump, Phase Single, Pump Housing Material Cast Iron, Motor Enclosure Open Dripproof, Horsepower 1/3 hp, Nameplate Voltage 115/230V AC, Flow Rate @ 20 psi 28 gpm, Shut Off Pressure (Maximum) 27 psi, Compatible Intake Pipe Size 1 1/2 in, Compatible Discharge Pipe Size 1 1/4 in, Intake Type NPT, Mounting Orientation Horizontal, For Use With Potable Systems No, Amps 7.5/3.4 A, Best Efficiency Pressure 19 psi, Case Pressure (Maximum) 100 psi, Compatible with Media Type Water
9999 in stock
Must order in multiples of 1
Subtotal:
$461.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.