| Property | Value |
|---|---|
| Item | Air Gearmotor |
| Motor Design | Not Applicable |
| Running Torque @ Max. Pressure | 400 in-lb |
| HP | 1.25 hp |
| Max. Air Flow | 60 cfm |
| No Load RPM | 200 RPM |
| Shaft Dia. | 1 in |
| Mounting | Face and Foot |
| Port Size | 1/4 in NPT |
| Rotation | CW/CCW |
| Overall Length | 11 11/16 in |
| Housing Material | Cast Iron |
| Shaft Length | 2 3/4 in |
| Finish | Gray |
| Gear Ratio | 15:1 |
| RPM @ Max. Torque | 20 RPM |
| Operating Temp. Range | 0 Degrees to 250 Degrees F |
| Overall Height | 6 5/8 in |
| Overall Width | 6 1/8 in |
| Max. Air Pressure | 80 psi |
| Length Less Shaft | 8 15/16 in |
| Standards | Not Applicable |
| Includes | Muffler |
| Mount Type | Face, Foot |
| Outside Diameter | 6 in |
| Weight | 30.87 lb |
| IP Rating | Not Applicable |
| Output Location | Not Applicable |
| Maximum Ambient Temperature | 250 Degrees F |
| Bearing Protection | Not Applicable |
| Keyway Width | 1/4 in |
| Output Power @ Maximum Speed | 1.25 hp |
| Mount Hole Center-to-Center Width | Not Applicable |
| AGMA Gear Class | Not Applicable |
| Shaft Diameter | 1 in |
| Manufacturers Warranty Length | 1 yr |
| Air Consumption | 60 cfm |
| Output Power @ 50% Maximum Speed | Not Applicable |
| Gear Type | Not Applicable |
| Mount Hole Center-to-Center Length | Not Applicable |
| Gear Material Grade | 42CrMo |
| Maximum Operating Pressure | 80 psi |
| Shaft Orientation | Parallel |
| Housing Material Grade | 42CrMo |
| Nameplate Speed | 30 RPM |
| Keyway Length | 2 1/4 in |
| Inlet Gender | Female |
| Gear Material | Steel |
| Keyway Depth | 1/8 in |
| Maximum Flow Rate | 60 cfm |
| Minimum Operating Pressure | 20 psi |
| Shaft Material Grade | 42CrMo |
| Seal Material | Nitrile Rubber |
| Output Power @ 25% Maximum Speed | Not Applicable |
| Air Inlet Type | NPT |
| Speed @ Maximum Torque | 20 RPM |
| Keyway Type | Flat Key |
| Motor Frame Material | Cast Iron |
| Number of Output Shafts | 1 |
| Series | Not Applicable |
| Mounting Orientation | Any Angle |
| Air Inlet Center to Center Distance | 2 1/2 in |
| Starting Torque | 33.34 ft-lb |
| Maximum Torque | 400 in-lb |
| Minimum Ambient Temperature | 0 Degrees F |
| Minimum Flow Rate | 4.22 cfm |
| Inlet Size | 1/4 in |
| Brake Type | Not Applicable |
| External Hardware Material | Not Applicable |
| Housing Material Finish | Painted |
| No Load Speed | 200 RPM |
| Shaft Material | Steel |
| System of Measurement | Inch |
| Number of Vanes | 4 |
| Alternate Part Number | Not Applicable |
| Output Shaft Type | Keyed |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Air Gearmotor, 1.25 HP, 60 cfm, 200 rpm, Speedaire, Mfr#: 22UX81
$553,82
Free shipping will be applied on orders over $50
Air Gearmotor, Output Power @ Maximum Speed 1.25 hp, Maximum Torque 400 in-lb, No Load Speed 200 RPM, Maximum Flow Rate 60 cfm, Shaft Diameter 1 in, Shaft Length 2 3/4 in, Mount Type Face, Foot, Inlet Size 1/4 in, Air Inlet Type NPT, Rotation CW/CCW, Housing Material Cast Iron, Gear Ratio 15:1, Air Consumption 60 cfm, Housing Material Finish Painted, AGMA Gear Class Not Applicable, Air Inlet Center to Center Distance 2 1/2 in, Inlet Gender Female
9999 in stock
Must order in multiples of 1
Subtotal:
$553.82
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.