| Property | Value |
|---|---|
| Housing Material | Aluminum |
| Gear Ratio | 40:1 |
| Item | Actuator |
| Full Load Amps | 3.2 A |
| Max. Ambient Temp. | 65 Degrees C/149 Degrees F |
| Duty Cycle | 25 % |
| Rated Load | 225 lb |
| Drive System Type | Gear |
| Standards | CE Listed, Electromagnetic Compatibility Directive 2014/30/Eu, Medical Device Directive 93/42/EEC (LD3M Only) |
| Stroke Length | 200 mm |
| Gear Case Type | Aluminum |
| Feedback Signal | Potentiometer |
| Enclosure Type | IP54 |
| Voltage | 12V DC |
| Speed @ Rated Load | 5.5 mm/sec |
| Limit Switch Type | Preset |
| Retracted Length | 341 mm |
| Speed at Full Load | 0.21 in/sec |
| Enclosure IP Rating | IP65 |
| Nut Material | Plastic |
| Full Load Current | 3.2 A |
| Limit Switch Setting | Fixed |
| System of Measurement | Metric |
| Motor Type | Permanent Magnet |
| Gear Material | Aluminum |
| Series | ND3L |
| Overall Width | 1.653 in |
| Operating Temperature - Minimum | -13 Degrees F |
| Load Capacity | 225 lbf |
| Includes Capacitor | Capacitor Included |
| Operating Temperature - Maximum | 149 Degrees F |
| Speed at No Load | 1.72 in/sec |
| Country of Origin (subject to change) | Taiwan, Province of China |
| Package Quantity | 1 |
Actuator, 12VDC, Rated Load 225 lb, Ntn, Mfr#: ND3L-12-40-200P-IP65-A341
$199,99
Free shipping will be applied on orders over $50
Actuator, Motor Type Permanent Magnet, Voltage 12V DC, Nut Material Plastic, Load Capacity 225 lbf, Stroke Length 200 mm, Speed at Full Load 0.21 in/sec, Duty Cycle 25 Percent, Full Load Current 3.2 A, Retracted Length 341 mm, Gear Material Aluminum, Includes Capacitor Capacitor Included, Drive System Type Gear, Enclosure IP Rating IP65, Housing Material Aluminum, Limit Switch Setting Fixed, Operating Temperature - Maximum 149 Degrees F, Operating Temperature - Minimum -13 Degrees F
9999 in stock
Must order in multiples of 1
Subtotal:
$199.99
You must be logged in to post a review.
Reviews
There are no reviews yet.