| Property | Value |
|---|---|
| HP | 4/10 |
| Phase - Pumps | 1 |
| Switch Actuation | No Switch Included |
| Body Material | Cast Iron |
| Base Material | Polypropylene |
| Flow Rate @ 10 Ft. of Head | 60 gpm |
| Max. Head | 18 ft |
| Impeller Material | Thermoplastic |
| Max. Diameter Solids | 2 in |
| Motor RPM | 1725 |
| Height | 14-3/4 |
| Amps | 4.70 A |
| Max. Head - Pumps | 18 ft. |
| Housing Material | Cast iron |
| Cord Length - Pumps | 15 ft. |
| Switch Type - Pumps | No Switch Included |
| Pump Body Material | Cast Iron |
| Voltage - Pumps | 240VAC |
| Manufacturers Warranty Length | 3 yr |
| Shaft Seal | Carbon/Ceramic |
| Bearing Type | Sleeve |
| Pump Type | Manual |
| Item - Sewage Pumps | Submersible Sewage Pump |
| Discharge NPT | 2 |
| Max. Dia. Solids | 2 |
| Cord Length | 15 ft |
| Max. Liquid Temp. | 130 Degrees F |
| GPM of Water @ 10 Ft. of Head | 60 |
| Shaft Seal Material - Pumps | Carbon, Ceramic |
| Amps - Pumps | 4.70 |
| Phase | 1 |
| GPM of Water @ 5 Ft. of Head | 90 |
| Pump HP | 4/10 |
| Diameter | 13-1/8 |
| Motor Type | Hermetically-Sealed, Oil-Filled, Permanent Split Capacitor |
| GPM of Water @ 15 Ft. of Head | 22 |
| Item | Sewage Ejector Pump |
| Impeller Material - Pumps | Polypropylene |
| Input Phase AC | 1 |
| Thermal Protection | Yes |
| Voltage | 230 |
| Switch Type | None |
| Agency Compliance | CSA Certified, UL Listed |
| Min. Sump Pit Dia. | 18 in |
| Discharge | 2 in FNPT |
| Duty Cycle | Continuous |
| Discharge Gender | Female |
| Overall Height | 14 3/4 in |
| Switch Electrical Connection | No Switch Included |
| Discharge Standard | NPT |
| On Point | 12 1/2 in |
| Rated Voltage | 230V AC |
| Flow Rate @ 15 Ft. of Head | 23 gpm |
| Discharge Dia. | 2 in |
| Body Dia. | 13 1/8 in |
| Off Point | 4 1/2 in |
| RPM | 1,725 RPM |
| Type | Manual |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Waste-Mate 4/10 HP 2" Manual Submersible Sewage Pump 230V, Zoeller, Mfr#: E264
$532,50
Free shipping will be applied on orders over $50
Sewage Ejector Pump, HP 4/10, Rated Voltage 230V AC, Phase - Pumps 1, Amps 4.70 A, Motor Type Hermetically-Sealed, Oil-Filled, Permanent Split Capacitor, Body Material Cast Iron, Impeller Material Thermoplastic, Shaft Seal Material - Pumps Carbon, Ceramic, Switch Actuation No Switch Included, Switch Electrical Connection No Switch Included, On Point 12 1/2 in, Off Point 4 1/2 in, Flow Rate @ 10 Ft. of Head 60 gpm, Flow Rate @ 15 Ft. of Head 23 gpm, Max. Diameter Solids 2 in
9999 in stock
Must order in multiples of 1
Subtotal:
$532.5
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.